Viewing: recovery-small.sh
#!/usr/bin/bash
set -e
PTLDEBUG=${PTLDEBUG:--1}
LUSTRE=${LUSTRE:-$(dirname $0)/..}
. $LUSTRE/tests/test-framework.sh
init_test_env "$@"
init_logging
ALWAYS_EXCEPT="$RECOVERY_SMALL_EXCEPT "
if $SHARED_KEY; then
always_except LU-17141 133
fi
build_test_filter
require_dsh_mds || exit 0
# Allow us to override the setup if we already have a mounted system by
# setting SETUP=" " and CLEANUP=" "
SETUP=${SETUP:-""}
CLEANUP=${CLEANUP:-""}
check_and_setup_lustre
assert_DIR
rm -rf $DIR/d[0-9]* $DIR/f.${TESTSUITE}*
# new sequence needed for MDS < v2_15_61-226-gf00d2467fc
if (( $MDS1_VERSION < $(version_code 2.15.61.226) )); then
force_new_seq_all
fi
test_1() {
local f1="$DIR/$tfile"
local f2="$DIR/$tfile.2"
drop_request "mcreate $f1" ||
error_noexit "create '$f1': drop req"
drop_reint_reply "mcreate $f2" ||
error_noexit "create '$f2': drop rep"
drop_request "tchmod 111 $f2" ||
error_noexit "chmod '$f2': drop req"
drop_reint_reply "tchmod 666 $f2" ||
error_noexit "chmod '$f2': drop rep"
drop_request "statone $f2" ||
error_noexit "stat '$f2': drop req"
drop_reply "statone $f2" ||
error_noexit "stat '$f2': drop rep"
}
run_test 1 "create, chmod, stat: drop req, drop rep"
test_4() {
local t=$DIR/$tfile
do_facet_create_file client $t 10K ||
error_noexit "Create file $t"
drop_request "cat $t > /dev/null" ||
error_noexit "Open request for $t file"
drop_reply "cat $t > /dev/null" ||
error_noexit "Open replay for $t file"
}
run_test 4 "open: drop req, drop rep"
test_5() {
local T=$DIR/$tfile
local R="$T-renamed"
local RR="$T-renamed-again"
do_facet_create_file client $T 10K ||
error_noexit "Create file $T"
drop_request "mv $T $R" ||
error_noexit "Rename $T"
drop_reint_reply "mv $R $RR" ||
error_noexit "Failed rename replay on $R"
do_facet client "checkstat -v $RR" ||
error_noexit "checkstat error on $RR"
do_facet client "rm $RR" ||
error_noexit "Can't remove file $RR"
}
run_test 5 "rename: drop req, drop rep"
test_6() {
local T=$DIR/$tfile
local LINK1=$DIR/$tfile.link1
local LINK2=$DIR/$tfile.link2
do_facet_create_file client $T 10K || error_noexit "Create file $T"
drop_request "link $T $LINK1" || error_noexit "link request for $T"
drop_reint_reply "link $T $LINK2" || error_noexit "link reply for $T"
drop_request "unlink $LINK1" || error_noexit "unlink request for $T"
drop_reint_reply "unlink $LINK2" || error_noexit "unlink reply for $T"
do_facet client "rm $T" || error_noexit "Can't remove file $T"
}
run_test 6 "link, unlink: drop req, drop rep"
#bug 1423
test_8() {
drop_reint_reply "touch $DIR/$tfile" || return 1
}
run_test 8 "touch: drop rep (bug 1423)"
#bug 1420
test_9() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
local t1=${tfile}.1
local t2=${tfile}.2
do_facet_random_file client $TMP/$tfile 1K ||
error_noexit "Create random file $TMP/$tfile"
# make this big, else test 9 doesn't wait for bulk -- bz 5595
do_facet_create_file client $TMP/$t1 4M ||
error_noexit "Create file $TMP/$t1"
do_facet client "cp $TMP/$t1 $DIR/$t1" ||
error_noexit "Can't copy to $DIR/$t1 file"
pause_bulk "cp $TMP/$tfile $DIR/$tfile" ||
error_noexit "Can't pause_bulk copy"
do_facet client "cp $TMP/$t1 $DIR/$t2" ||
error_noexit "Can't copy file"
do_facet client "sync"
do_facet client "rm $DIR/$tfile $DIR/$t2 $DIR/$t1" ||
error_noexit "Can't remove files"
do_facet client "rm $TMP/$t1 $TMP/$tfile"
}
run_test 9 "pause bulk on OST (bug 1420)"
#bug 1521
test_10a() {
local before=$(date +%s)
local evict
local lru_param="ldlm.namespaces.*mdc*.lru_max_age"
local old_max_age=($($LCTL get_param -n $lru_param))
local old_ratelimit=$($LCTL get_param console_ratelimit)
$LCTL set_param $lru_param=3900s console_ratelimit=0
stack_trap "$LCTL set_param $lru_param=$old_max_age $old_ratelimit"
do_facet client "stat $DIR > /dev/null" ||
error "failed to stat $DIR: $?"
drop_bl_callback "chmod 0777 $DIR" ||
error "failed to chmod $DIR: $?"
# let the client reconnect
client_reconnect
evict=$(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state |
awk -F"[ [,]" '/EVICTED ]$/ { if (mx<$5) {mx=$5;} } END { print mx }')
[[ -n "$evict" ]] && (( $evict > $before )) ||
(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state;
error "no eviction: $evict before:$before")
do_facet client checkstat -v -p 0777 $DIR ||
error "client checkstat failed: $?"
# console messages may be ratelimited on later iterations
(( ONLY_REPEAT_ITER == 1 )) || return 0
# check that the thread watchdog is working properly
do_facet mds1 dmesg | tac | sed "/${TESTNAME/_/ }/,$ d" |
grep "[Ss]ervice thread pid .* was inactive" ||
error "no service thread inactive message for ${TESTNAME/_/ }"
# can't check for "completed" message where it was removed
(( $MDS1_VERSION > $(version_code v2_12_50-83-gfc9de679a4) &&
$MDS1_VERSION < $(version_code 2.15.62.59) )) ||
do_facet mds1 dmesg | tac | sed "/${TESTNAME/_/ }/,$ d" |
grep "[Ss]ervice thread pid .* completed after" ||
error "no service thread completed message for ${TESTNAME/_/ }"
}
run_test 10a "finish request on server after client eviction (bug 1521)"
test_10b() {
local before=$(date +%s)
local evict
[[ "$MDS1_VERSION" -lt $(version_code 2.6.53) ]] &&
skip "Need MDS version at least 2.6.53"
do_facet client "stat $DIR > /dev/null" ||
error "failed to stat $DIR: $?"
drop_bl_callback_once "chmod 0777 $DIR" ||
error "failed to chmod $DIR: $?"
# let the client reconnect
client_reconnect
evict=$(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state |
awk -F"[ [,]" '/EVICTED ]$/ { if (mx<$5) {mx=$5;} } END { print mx }')
[ -z "$evict" ] || [[ $evict -le $before ]] ||
(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state;
error "eviction happened: $evict before:$before")
do_facet client checkstat -v -p 0777 $DIR ||
error "client checkstat failed: $?"
}
run_test 10b "re-send BL AST"
test_10c() {
local before=$(date +%s)
local evict
local mdccli
local mdcpath
local conn_uuid
local workdir
local pid
local rc
workdir="${DIR}/${tdir}"
mkdir -p ${workdir} || error "can't create workdir $?"
stat ${workdir} > /dev/null ||
error "failed to stat ${workdir}: $?"
mdtidx=$($LFS getdirstripe -i ${workdir})
mdtname=$($LFS mdts ${workdir} | grep -e "^$mdtidx:" |
awk '{sub("_UUID", "", $2); print $2;}')
#assume one client
mdccli=$($LCTL dl | grep "${mdtname}-mdc" | awk '{print $4;}')
conn_uuid=$($LCTL get_param -n mdc.${mdccli}.conn_uuid)
mdcpath="mdc.${mdccli}.import=connection=${conn_uuid}"
drop_bl_callback_once "chmod 0777 ${workdir}" &
pid=$!
# let chmod blocked
sleep 1
# force client reconnect
$LCTL set_param "${mdcpath}"
# wait client reconnect
client_reconnect
wait $pid
rc=$?
evict=$($LCTL get_param mdc.${mdccli}.state |
awk -F"[ [,]" '/EVICTED]$/ { if (t<$4) {t=$4;} } END { print t }')
[[ $evict -le $before ]] ||
( $LCTL get_param mdc.$FSNAME-MDT*.state;
error "eviction happened: $EVICT before:$BEFORE" )
[ $rc -eq 0 ] || error "chmod must finished OK"
checkstat -v -p 0777 "${workdir}" ||
error "client checkstat failed: $?"
}
run_test 10c "re-send BL AST vs reconnect race (LU-5569)"
test_10d() {
local before=$(date +%s)
local evict
[[ "$MDS1_VERSION" -lt $(version_code 2.6.90) ]] &&
skip "Need MDS version at least 2.6.90"
# sleep 1 is to make sure that BEFORE is not equal to EVICTED below
sleep 1
rm -f $TMP/$tfile
echo -n ", world" | dd of=$TMP/$tfile bs=1c seek=5
remount_client $MOUNT
mount_client $MOUNT2
cancel_lru_locks osc
$LFS setstripe -i 0 -c 1 $DIR1/$tfile
echo -n hello | dd of=$DIR1/$tfile bs=5
stat $DIR2/$tfile >& /dev/null
$LCTL set_param fail_err=71
drop_bl_callback "echo -n \\\", world\\\" >> $DIR2/$tfile"
client_reconnect
cancel_lru_locks osc
cmp -l $DIR1/$tfile $DIR2/$tfile || error "file contents differ"
cmp -l $DIR1/$tfile $TMP/$tfile || error "wrong content found"
evict=$(do_facet client $LCTL get_param osc.$FSNAME-OST0000*.state | \
tr -d '\-\[\] ' | \
awk -F"[ [,]" '/EVICTED$/ { if (mx<$1) {mx=$1;} } END { print mx }')
[[ $evict -gt $before ]] ||
(do_facet client $LCTL get_param osc.$FSNAME-OST0000*.state;
error "no eviction: $evict before:$before")
$LCTL set_param fail_err=0
rm $TMP/$tfile
umount_client $MOUNT2
}
run_test 10d "test failed blocking ast"
test_10e()
{
[[ "$OST1_VERSION" -le $(version_code 2.8.58) ]] &&
skip "Need OST version at least 2.8.59"
[ $CLIENTCOUNT -lt 2 ] && skip "need two clients"
[ $(facet_host client) == $(facet_host ost1) ] &&
skip "need ost1 and client on different nodes"
local -a clients=(${CLIENTS//,/ })
local client1=${clients[0]}
local client2=${clients[1]}
$LFS setstripe -c 1 -i 0 $DIR/$tfile-1 $DIR/$tfile-2
$MULTIOP $DIR/$tfile-1 Ow1048576c
#define OBD_FAIL_LDLM_BL_CALLBACK_NET 0x305
$LCTL set_param fail_loc=0x80000305
#define OBD_FAIL_LDLM_ENQUEUE_OLD_EXPORT 0x30e
do_facet ost1 "$LCTL set_param fail_loc=0x1000030e"
# hit OBD_FAIL_LDLM_ENQUEUE_OLD_EXPORT twice:
# 1. to return ENOTCONN from ldlm_handle_enqueue0
# 2. to pause reconnect handling between resend and setting
# import to LUSTRE_IMP_FULL state
do_facet ost1 "$LCTL set_param fail_val=3"
# client1 fails ro respond to bl ast
do_node $client2 "$MULTIOP $DIR/$tfile-1 Ow1048576c" &
MULTIPID=$!
# ost1 returns error on enqueue, which causes client1 to reconnect
do_node $client1 "$MULTIOP $DIR/$tfile-2 Ow1048576c" ||
error "multiop failed"
wait $MULTIPID
do_facet ost1 "$LCTL set_param fail_loc=0"
do_facet ost1 "$LCTL set_param fail_val=0"
}
run_test 10e "re-send BL AST vs reconnect race 2"
#bug 2460
# wake up a thread waiting for completion after eviction
test_11(){
do_facet client $MULTIOP $DIR/$tfile Ow ||
{ error "multiop write failed: $?"; return 1; }
do_facet client $MULTIOP $DIR/$tfile or ||
{ error "multiop read failed: $?"; return 2; }
cancel_lru_locks osc
do_facet client $MULTIOP $DIR/$tfile or ||
{ error "multiop read failed: $?"; return 3; }
drop_bl_callback_once $MULTIOP $DIR/$tfile Ow ||
echo "evicted as expected"
do_facet client unlink $DIR/$tfile ||
{ error "unlink failed: $?"; return 4; }
# allow recovery to complete
client_up || client_up || sleep $TIMEOUT
}
run_test 11 "wake up a thread waiting for completion after eviction (b=2460)"
#b=2494
test_12(){
$LCTL mark $MULTIOP $DIR/$tfile OS_c
do_facet $SINGLEMDS "lctl set_param fail_loc=0x115"
clear_failloc $SINGLEMDS $((TIMEOUT * 2)) &
multiop_bg_pause $DIR/$tfile OS_c ||
{ error "multiop failed: $?"; return 1; }
PID=$!
#define OBD_FAIL_MDS_CLOSE_NET 0x115
kill -USR1 $PID
echo "waiting for multiop $PID"
wait $PID || { error "wait for multiop faile: $?"; return 2; }
do_facet client unlink $DIR/$tfile ||
{ error "client unlink failed: $?"; return 3; }
# allow recovery to complete
client_up || client_up || sleep $TIMEOUT
}
run_test 12 "recover from timed out resend in ptlrpcd (b=2494)"
# Bug 113, check that readdir lost recv timeout works.
test_13() {
mkdir_on_mdt0 $DIR/$tdir || { error "mkdir failed: $?"; return 1; }
touch $DIR/$tdir/newentry || { error "touch failed: $?"; return 2; }
# OBD_FAIL_MDS_READPAGE_NET|CFS_FAIL_ONCE
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000104"
ls $DIR/$tdir || { error "ls failed: $?"; return 3; }
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
rm -rf $DIR/$tdir || { error "remove test dir failed: $?"; return 4; }
}
run_test 13 "mdc_readpage restart test (bug 1138)"
# Bug 113, check that readdir lost send timeout works.
test_14() {
mkdir_on_mdt0 $DIR/$tdir
touch $DIR/$tdir/newentry
# OBD_FAIL_MDS_SENDPAGE|CFS_FAIL_ONCE
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000106"
ls $DIR/$tdir || return 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
}
run_test 14 "mdc_readpage resend test (bug 1138)"
test_15() {
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000128"
touch $DIR/$tfile && return 1
return 0
}
run_test 15 "failed open (-ENOMEM)"
READ_AHEAD=`lctl get_param -n llite.*.max_read_ahead_mb | head -n 1`
stop_read_ahead() {
lctl set_param -n llite.*.max_read_ahead_mb 0
}
start_read_ahead() {
lctl set_param -n llite.*.max_read_ahead_mb $READ_AHEAD
}
test_16() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
do_facet_random_file client $TMP/$tfile 100K ||
{ error_noexit "Create random file $TMP/$T" ; return 0; }
do_facet client "cp $TMP/$tfile $DIR/$tfile" ||
{ error_noexit "Copy to $DIR/$tfile file" ; return 0; }
sync
stop_read_ahead
#define OBD_FAIL_PTLRPC_BULK_PUT_NET 0x504 | CFS_FAIL_ONCE
do_facet ost1 "lctl set_param fail_loc=0x80000504"
cancel_lru_locks osc
# OST bulk will time out here, client resends
do_facet client "cmp $TMP/$tfile $DIR/$tfile" || return 1
do_facet ost1 lctl set_param fail_loc=0
# give recovery a chance to finish (shouldn't take long)
sleep $TIMEOUT
do_facet client "cmp $TMP/$tfile $DIR/$tfile" || return 2
start_read_ahead
rm -f $TMP/$tfile
}
run_test 16 "timeout bulk put, don't evict client (2732)"
test_17a() {
local at_max_saved=0
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
local SAMPLE_FILE=$TMP/$tfile
do_facet_random_file client $SAMPLE_FILE 20K ||
{ error_noexit "Create random file $SAMPLE_FILE" ; return 0; }
# With adaptive timeouts, bulk_get won't expire until
# adaptive_timeout_max
if at_is_enabled; then
at_max_saved=$(at_max_get ost1)
at_max_set $TIMEOUT ost1
fi
# OBD_FAIL_PTLRPC_BULK_GET_NET 0x0503 | CFS_FAIL_ONCE
# OST bulk will time out here, client retries
do_facet ost1 lctl set_param fail_loc=0x80000503
# need to ensure we send an RPC
do_facet client cp $SAMPLE_FILE $DIR/$tfile
sync
# with AT, client will wait adaptive_max*factor+net_latency before
# expiring the req, hopefully timeout*2 is enough
sleep $(($TIMEOUT*2))
do_facet ost1 lctl set_param fail_loc=0
do_facet client "df $DIR"
# expect cmp to succeed, client resent bulk
do_facet client "cmp $SAMPLE_FILE $DIR/$tfile" || return 3
do_facet client "rm $DIR/$tfile" || return 4
[ $at_max_saved -ne 0 ] && at_max_set $at_max_saved ost1
return 0
}
run_test 17a "timeout bulk get, don't evict client (2732)"
test_17b() {
[ -z "$RCLIENTS" ] && skip "Needs multiple clients" && return 0
# get one of the clients from client list
local rcli=$(echo $RCLIENTS | cut -d ' ' -f 1)
local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
local ldlm_enqueue_min=$(do_facet ost1 "find /sys/module \
-name ldlm_enqueue_min")
[ -z "$ldlm_enqueue_min" ] &&
skip "missing /sys/module/.../ldlm_enqueue_min" && return 0
$LFS setstripe -i 0 -c 1 -S 1048576 $DIR/$tfile ||
error "setstripe failed"
$LFS setstripe -i 0 -c 1 -S 1048576 $DIR/${tfile}2 ||
error "setstripe 2 failed"
save_lustre_params ost1 "at_history" > $p
save_lustre_params ost1 "bulk_timeout" >> $p
local dev="${FSNAME}-OST0000"
save_lustre_params ost1 "obdfilter.$dev.brw_size" >> $p
local ldlm_enqueue_min_save=$(do_facet ost1 cat $ldlm_enqueue_min)
local new_at_history=15
do_facet ost1 "$LCTL set_param at_history=$new_at_history"
do_facet ost1 "$LCTL set_param bulk_timeout=30"
do_facet ost1 "echo 30 > /sys/module/ptlrpc/parameters/ldlm_enqueue_min"
# brw_size is required to be 4m so that bulk transfer timeout
# could be simulated with OBD_FAIL_PTLRPC_CLIENT_BULK_CB3
local brw_size=$($LCTL get_param -n \
osc.$FSNAME-OST0000-osc-[^M]*.import |
awk '/max_brw_size/{print $2}')
if [ $brw_size -ne 4194304 ]
then
save_lustre_params ost1 "obdfilter.$dev.brw_size" >> $p
do_facet ost1 "$LCTL set_param obdfilter.$dev.brw_size=4"
remount_client $MOUNT
fi
# get service estimate expanded
#define OBD_FAIL_OST_BRW_PAUSE_PACK 0x224
do_facet ost1 "$LCTL set_param fail_loc=0x80000224 fail_val=35"
echo "delay rpc servicing by 35 seconds"
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 conv=fdatasync
local estimate
estimate=$($LCTL get_param -n osc.$dev-osc-*.timeouts |
awk '/portal 6/ {print $5}')
echo "service estimates increased to $estimate"
# let current worst service estimate to get closer to obliteration
sleep $((new_at_history / 3))
# start i/o and simulate bulk transfer loss
#define OBD_FAIL_PTLRPC_CLIENT_BULK_CB3 0x520
do_facet ost1 "$LCTL set_param fail_loc=0xa0000520 fail_val=1"
dd if=/dev/zero of=$DIR/$tfile bs=2M count=1 conv=fdatasync,notrunc &
local writedd=$!
# start lock conflict handling
sleep $((new_at_history / 3))
do_node $rcli "dd if=$DIR/$tfile of=/dev/null bs=1M count=1" &
local readdd=$!
# obliterate the worst service estimate
sleep $((new_at_history / 3 + 1))
dd if=/dev/zero of=$DIR/${tfile}2 bs=1M count=1
estimate=$($LCTL get_param -n osc.$dev-osc-*.timeouts |
awk '/portal 6/ {print $5}')
echo "service estimate dropped to $estimate"
wait $writedd
[[ $? == 0 ]] || error "write failed"
wait $readdd
[[ $? == 0 ]] || error "read failed"
restore_lustre_params <$p
if [ $brw_size -ne 4194304 ]
then
remount_client $MOUNT || error "remount_client failed"
fi
do_facet ost1 "echo $ldlm_enqueue_min_save > $ldlm_enqueue_min"
}
run_test 17b "timeout bulk get, dont evict client (3582)"
test_18a() {
[ -z ${ost2_svc} ] && skip_env "needs 2 osts" && return 0
do_facet_create_file client $TMP/$tfile 20K ||
{ error_noexit "Create file $TMP/$tfile" ; return 0; }
do_facet client mkdir -p $DIR/$tdir
f=$DIR/$tdir/$tfile
cancel_lru_locks osc
pgcache_empty || return 1
# 1 stripe on ost2
$LFS setstripe -i 1 -c 1 $f
stripe_index=$($LFS getstripe -i $f)
if [ $stripe_index -ne 1 ]; then
$LFS getstripe $f
error "$f: stripe_index $stripe_index != 1" && return
fi
do_facet client cp $TMP/$tfile $f
sync
local osc2dev=$($LCTL get_param -n devices | grep ${ost2_svc}-osc- |
grep -E -v 'MDT' | awk '{print $1}')
$LCTL --device $osc2dev deactivate || return 3
# my understanding is that there should be nothing in the page
# cache after the client reconnects?
rc=0
pgcache_empty || rc=2
$LCTL --device $osc2dev activate
rm -f $f $TMP/$tfile
return $rc
}
run_test 18a "manual ost invalidate clears page cache immediately"
test_18b() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
do_facet_create_file client $TMP/$tfile 20K ||
{ error_noexit "Create file $TMP/$tfile" ; return 0; }
do_facet client mkdir -p $DIR/$tdir
f=$DIR/$tdir/$tfile
cancel_lru_locks osc
pgcache_empty || return 1
$LFS setstripe -i 0 -c 1 $f
stripe_index=$($LFS getstripe -i $f)
if [ $stripe_index -ne 0 ]; then
$LFS getstripe $f
error "$f: stripe_index $stripe_index != 0" && return
fi
do_facet client cp $TMP/$tfile $f
sync
ost_evict_client
# allow recovery to complete
sleep $((TIMEOUT + 2))
# my understanding is that there should be nothing in the page
# cache after the client reconnects?
rc=0
pgcache_empty || rc=2
rm -f $f $TMP/$tfile
return $rc
}
run_test 18b "eviction and reconnect clears page cache (2766)"
test_18c() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
do_facet_create_file client $TMP/$tfile 20K ||
{ error_noexit "Create file $TMP/$tfile" ; return 0; }
do_facet client mkdir -p $DIR/$tdir
f=$DIR/$tdir/$tfile
cancel_lru_locks osc
pgcache_empty || return 1
$LFS setstripe -i 0 -c 1 $f
stripe_index=$($LFS getstripe -i $f)
if [ $stripe_index -ne 0 ]; then
$LFS getstripe $f
error "$f: stripe_index $stripe_index != 0" && return
fi
do_facet client cp $TMP/$tfile $f
sync
ost_evict_client
# OBD_FAIL_OST_CONNECT_NET2
# lost reply to connect request
do_facet ost1 lctl set_param fail_loc=0x80000225
# force reconnect
sleep 1
$LFS df $MOUNT > /dev/null 2>&1
sleep 2
# my understanding is that there should be nothing in the page
# cache after the client reconnects?
rc=0
pgcache_empty || rc=2
rm -f $f $TMP/$tfile
return $rc
}
run_test 18c "Dropped connect reply after eviction handing (14755)"
test_19a() {
local before=$(date +%s)
local evict
mount_client $DIR2 || error "failed to mount $DIR2"
# cancel cached locks from OST to avoid eviction from it
cancel_lru_locks osc
do_facet client "stat $DIR > /dev/null" ||
error "failed to stat $DIR: $?"
drop_ldlm_cancel "chmod 0777 $DIR2" ||
error "failed to chmod $DIR2"
umount_client $DIR2
# let the client reconnect
client_reconnect
evict=$(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state |
awk -F"[ [,]" '/EVICTED ]$/ \
{ if (mx<$5) {mx=$5;} } END { print mx }')
[[ -n "$evict" ]] && (( $evict >= $before )) ||
(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state;
error "no eviction: $evict < before: $before")
}
run_test 19a "test expired_lock_main on mds (2867)"
test_19b() {
local before=$(date +%s)
local evict
mount_client $DIR2 || error "failed to mount $DIR2: $?"
# cancel cached locks from MDT to avoid eviction from it
cancel_lru_locks mdc
do_facet client $MULTIOP $DIR/$tfile Ow ||
error "failed to run multiop: $?"
drop_ldlm_cancel $MULTIOP $DIR2/$tfile Ow ||
error "failed to ldlm_cancel: $?"
umount_client $DIR2 || error "failed to unmount $DIR2: $?"
do_facet client unlink $DIR/$tfile ||
error "failed to unlink $DIR/$tfile: $?"
# let the client reconnect
client_reconnect
evict=$(do_facet client $LCTL get_param osc.$FSNAME-OST*.state |
awk -F"[ [,]" '/EVICTED ]$/ \
{ if (mx < $5) {mx = $5;} } END { print mx }')
[[ -n "$evict" ]] && (( $evict >= $before )) ||
(do_facet client $LCTL get_param osc.$FSNAME-OST*.state;
error "no eviction: $evict < before: $before")
}
run_test 19b "test expired_lock_main on ost (2867)"
test_19c() {
local BEFORE=`date +%s`
mount_client $DIR2
$LCTL set_param ldlm.namespaces.*.early_lock_cancel=0
mkdir -p $DIR1/$tfile
stat $DIR1/$tfile
#define OBD_FAIL_PTLRPC_CANCEL_RESEND 0x516
do_facet mds $LCTL set_param fail_loc=0x80000516
touch $DIR2/$tfile/file1 &
PID1=$!
# let touch to get blocked on the server
sleep 2
wait $PID1
$LCTL set_param ldlm.namespaces.*.early_lock_cancel=1
umount_client $DIR2
# let the client reconnect
sleep 5
EVICT=$(do_facet client $LCTL get_param mdc.$FSNAME-MDT*.state |
awk -F"[ [,]" '/EVICTED ]$/ { if (mx<$5) {mx=$5;} } END { print mx }')
[ -z "$EVICT" ] || [[ $EVICT -le $BEFORE ]] || error "eviction happened"
}
run_test 19c "check reconnect and lock resend do not trigger expired_lock_main"
test_20a() { # bug 2983 - ldlm_handle_enqueue cleanup
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
mkdir -p $DIR/$tdir
$LFS setstripe -i 0 -c 1 $DIR/$tdir/${tfile}
multiop_bg_pause $DIR/$tdir/${tfile} O_wc || return 1
MULTI_PID=$!
cancel_lru_locks osc
#define OBD_FAIL_LDLM_ENQUEUE_EXTENT_ERR 0x308
do_facet ost1 lctl set_param fail_loc=0x80000308
kill -USR1 $MULTI_PID
wait $MULTI_PID
rc=$?
[ $rc -eq 0 ] && error "multiop didn't fail enqueue: rc $rc" || true
}
run_test 20a "ldlm_handle_enqueue error (should return error)"
test_20b() { # bug 2986 - ldlm_handle_enqueue error during open
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
mkdir -p $DIR/$tdir
$LFS setstripe -i 0 -c 1 $DIR/$tdir/${tfile}
cancel_lru_locks osc
#define OBD_FAIL_LDLM_ENQUEUE_EXTENT_ERR 0x308
do_facet ost1 lctl set_param fail_loc=0x80000308
dd if=/etc/hosts of=$DIR/$tdir/$tfile && \
error "didn't fail open enqueue" || true
}
run_test 20b "ldlm_handle_enqueue error (should return error)"
test_21a() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
close_pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000129"
$MULTIOP $DIR/$tdir-2/f Oc &
open_pid=$!
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000115"
kill -USR1 $close_pid
cancel_lru_locks mdc
wait $close_pid || return 1
wait $open_pid || return 2
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
$CHECKSTAT -t file $DIR/$tdir-1/f || return 3
$CHECKSTAT -t file $DIR/$tdir-2/f || return 4
rm -rf $DIR/$tdir-*
}
run_test 21a "drop close request while close and open are both in flight"
test_21b() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
close_pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000107"
mcreate $DIR/$tdir-2/f &
open_pid=$!
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
kill -USR1 $close_pid
cancel_lru_locks mdc
wait $close_pid || return 1
wait $open_pid || return 3
$CHECKSTAT -t file $DIR/$tdir-1/f || return 4
$CHECKSTAT -t file $DIR/$tdir-2/f || return 5
rm -rf $DIR/$tdir-*
}
run_test 21b "drop open request while close and open are both in flight"
test_21c() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
close_pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000107"
mcreate $DIR/$tdir-2/f &
open_pid=$!
sleep 3
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000115"
kill -USR1 $close_pid
cancel_lru_locks mdc
wait $close_pid || return 1
wait $open_pid || return 2
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
$CHECKSTAT -t file $DIR/$tdir-1/f || return 2
$CHECKSTAT -t file $DIR/$tdir-2/f || return 3
rm -rf $DIR/$tdir-*
}
run_test 21c "drop both request while close and open are both in flight"
test_21d() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000129"
$MULTIOP $DIR/$tdir-2/f Oc &
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000122"
kill -USR1 $pid
cancel_lru_locks mdc
wait $pid || return 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
$CHECKSTAT -t file $DIR/$tdir-1/f || return 2
$CHECKSTAT -t file $DIR/$tdir-2/f || return 3
rm -rf $DIR/$tdir-*
}
run_test 21d "drop close reply while close and open are both in flight"
test_21e() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000119"
touch $DIR/$tdir-2/f &
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
kill -USR1 $pid
cancel_lru_locks mdc
wait $pid || return 1
sleep $TIMEOUT
$CHECKSTAT -t file $DIR/$tdir-1/f || return 2
$CHECKSTAT -t file $DIR/$tdir-2/f || return 3
rm -rf $DIR/$tdir-*
}
run_test 21e "drop open reply while close and open are both in flight"
test_21f() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000119"
touch $DIR/$tdir-2/f &
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000122"
kill -USR1 $pid
cancel_lru_locks mdc
wait $pid || return 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
$CHECKSTAT -t file $DIR/$tdir-1/f || return 2
$CHECKSTAT -t file $DIR/$tdir-2/f || return 3
rm -rf $DIR/$tdir-*
}
run_test 21f "drop both reply while close and open are both in flight"
test_21g() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000119"
touch $DIR/$tdir-2/f &
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000115"
kill -USR1 $pid
cancel_lru_locks mdc
wait $pid || return 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
$CHECKSTAT -t file $DIR/$tdir-1/f || return 2
$CHECKSTAT -t file $DIR/$tdir-2/f || return 3
rm -rf $DIR/$tdir-*
}
run_test 21g "drop open reply and close request while close and open are both in flight"
test_21h() {
mkdir_on_mdt0 $DIR/$tdir-1
mkdir_on_mdt0 $DIR/$tdir-2
multiop_bg_pause $DIR/$tdir-1/f O_c || return 1
pid=$!
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000107"
touch $DIR/$tdir-2/f &
touch_pid=$!
sleep 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000122"
cancel_lru_locks mdc
kill -USR1 $pid
wait $pid || return 1
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
wait $touch_pid || return 2
$CHECKSTAT -t file $DIR/$tdir-1/f || return 3
$CHECKSTAT -t file $DIR/$tdir-2/f || return 4
rm -rf $DIR/$tdir-*
}
run_test 21h "drop open request and close reply while close and open are both in flight"
# bug 3462 - multiple MDC requests
test_22() {
f1=$DIR/${tfile}-1
f2=$DIR/${tfile}-2
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000115"
$MULTIOP $f2 Oc &
close_pid=$!
sleep 1
$MULTIOP $f1 msu || return 1
cancel_lru_locks mdc
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
wait $close_pid || return 2
rm -rf $f2 || return 4
}
run_test 22 "drop close request and do mknod"
test_23() { #b=4561
multiop_bg_pause $DIR/$tfile O_c || return 1
pid=$!
# give a chance for open
sleep 5
# try the close
drop_request "kill -USR1 $pid"
fail $SINGLEMDS
wait $pid || return 1
return 0
}
run_test 23 "client hang when close a file after mds crash"
test_24a() { # bug 11710 details correct fsync() behavior
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
mkdir -p $DIR/$tdir
$LFS setstripe -i 0 -c 1 $DIR/$tdir
cancel_lru_locks osc
multiop_bg_pause $DIR/$tdir/$tfile Owy_wyc || return 1
MULTI_PID=$!
ost_evict_client
kill -USR1 $MULTI_PID
wait $MULTI_PID
rc=$?
lctl set_param fail_loc=0x0
client_reconnect
[ $rc -eq 0 ] &&
error_ignore bz5494 "multiop didn't fail fsync: rc $rc" || true
}
run_test 24a "fsync error (should return error)"
test_24b() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
dmesg -c > /dev/null
mkdir -p $DIR/$tdir
lfs setstripe $DIR/$tdir -S 0 -i 0 -c 1 ||
error "$LFS setstripe failed"
cancel_lru_locks osc
multiop_bg_pause $DIR/$tdir/$tfile-1 Ow8192_yc ||
error "mulitop Ow8192_yc failed"
MULTI_PID1=$!
multiop_bg_pause $DIR/$tdir/$tfile-2 Ow8192_c ||
error "mulitop Ow8192_c failed"
MULTI_PID2=$!
ost_evict_client
kill -USR1 $MULTI_PID1
wait $MULTI_PID1
rc1=$?
kill -USR1 $MULTI_PID2
wait $MULTI_PID2
rc2=$?
lctl set_param fail_loc=0x0
client_reconnect
[ $rc1 -eq 0 -o $rc2 -eq 0 ] &&
error_ignore bz5494 "multiop didn't fail fsync: $rc1 or close: $rc2" ||
true
dmesg | grep "dirty page discard:" ||
error "no discarded dirty page found!"
}
run_test 24b "test dirty page discard due to client eviction"
test_26a() { # was test_26 bug 5921 - evict dead exports by pinger
# this test can only run from a client on a separate node.
remote_ost || { skip "local OST" && return 0; }
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
remote_mds || { skip "local MDS" && return 0; }
if [ $(facet_host mgs) = $(facet_host ost1) ]; then
skip "msg and ost1 are at the same node"
return 0
fi
check_timeout || return 1
# make sure all imports are connected and not IDLE
do_facet client lfs df > /dev/null
# make sure client will not be discarded by server due to LU-14708
$LFS setstripe -c -1 -S 64K $MOUNT/$tfile
dd if=/dev/zero of=$MOUNT/$tfile bs=64K count=$OSTCOUNT oflag=sync ||
error "dd failed"
sync; sleep 5; sync
# OBD_FAIL_PTLRPC_DROP_RPC 0x505
do_facet client lctl set_param fail_loc=0x505
local before=$(date +%s)
local rc=0
# evictor takes PING_EVICT_TIMEOUT to evict.
# But if there's a race to start the evictor from various obds,
# the loser might have to wait for the next ping.
sleep $((TIMEOUT * 2))
do_facet client lctl set_param fail_loc=0x0
do_facet client lfs df > /dev/null
local oscs=$(lctl dl | awk '/-osc-/ {print $4}')
check_clients_evicted "$before ${oscs[@]}"
check_clients_full 10 "${oscs[@]}"
}
run_test 26a "evict dead exports"
wait_client_evicted () {
local facet=$1
local exports=$2
local timeout=$3
local varsvc=${facet}_svc
wait_update_cond $(facet_active_host $facet) \
"lctl get_param -n *.${!varsvc}.num_exports | cut -d' ' -f2" \
"-le" $((exports - 1)) $timeout
}
test_26b() { # bug 10140 - evict dead exports by pinger
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
[[ $(facet_host mgs) != $(facet_host ost1) ]] ||
skip "msg and ost1 are at the same node"
check_timeout || return 1
clients_up
# must be equal on all the nodes
local INTERVAL=$(do_facet $SINGLEMDS lctl get_param -n ping_interval)
local AT_MAX_SAVED=$(at_max_get mds1)
local ENQUEUE_MIN=$(do_facet $SINGLEMDS \
lctl get_param -n ldlm.ldlm_enqueue_min)
# set it before the new export got its first exp_deadline,
# in case it is large, small at_max has no effect on it.
at_max_set $TIMEOUT mds1
at_max_set $TIMEOUT ost1
stack_trap "at_max_set $AT_MAX_SAVED mds1" EXIT
stack_trap "at_max_set $AT_MAX_SAVED ost1" EXIT
zconf_mount $HOSTNAME $MOUNT2 ||
{ error "Failed to mount $MOUNT2"; return 2; }
# make sure all imports are connected and not IDLE
wait_clients_import_state $HOSTNAME mds1 FULL
wait_clients_import_state $HOSTNAME ost1 FULL
local mds_nexp=$(do_facet mds1 \
lctl get_param -n mdt.${mds1_svc}.num_exports)
local ost_nexp=$(do_facet ost1 \
lctl get_param -n obdfilter.${ost1_svc}.num_exports)
mkdir_on_mdt0 $DIR/$tdir
$LFS setstripe -c -1 $MOUNT2/$tdir/$tfile
echo "starting with '$ost_nexp' OST and '$mds_nexp' MDS exports"
zconf_umount $HOSTNAME $MOUNT2 -f
# see ptlrpc_export_timeout() for the pinger case
local TOUT=$(((INTERVAL * 2) + TIMEOUT))
TOUT=$((TOUT + TIMEOUT + (TIMEOUT >> 2) + 5))
TOUT=$((TOUT + (TIMEOUT/20) + TIMEOUT))
TOUT=$((TOUT + (TOUT >> 4)))
# take a bit more the test sake
TOUT=$(((TOUT > ENQUEUE_MIN ? TOUT : ENQUEUE_MIN) + 5))
echo i $INTERVAL m $AT_MAX_SAVED t $TIMEOUT e $ENQUEUE_MIN wait $TOUT
wait_client_evicted ost1 $ost_nexp $TOUT ||
error "Client was not evicted by OSS"
wait_client_evicted mds1 $mds_nexp $TOUT ||
error "Client was not evicted by MDS"
}
run_test 26b "evict dead exports"
test_27() {
mkdir_on_mdt0 $DIR/$tdir
writemany -q -a $DIR/$tdir/$tfile 0 5 &
CLIENT_PID=$!
sleep 1
local save_FAILURE_MODE=$FAILURE_MODE
FAILURE_MODE="SOFT"
facet_failover $SINGLEMDS
#define OBD_FAIL_OSC_SHUTDOWN 0x407
do_facet $SINGLEMDS lctl set_param fail_loc=0x80000407
# need to wait for reconnect
echo waiting for fail_loc
wait_update_facet $SINGLEMDS "lctl get_param -n fail_loc" "-2147482617"
facet_failover $SINGLEMDS
#no crashes allowed!
kill -USR1 $CLIENT_PID
wait $CLIENT_PID
true
FAILURE_MODE=$save_FAILURE_MODE
}
run_test 27 "fail LOV while using OSC's"
test_28() { # bug 6086 - error adding new clients
do_facet client mcreate $DIR/$tfile || return 1
drop_bl_callback_once "chmod 0777 $DIR/$tfile" ||
echo "evicted as expected"
#define OBD_FAIL_MDS_CLIENT_ADD 0x12f
do_facet $SINGLEMDS "lctl set_param fail_loc=0x8000012f"
# fail once (evicted), reconnect fail (fail_loc), ok
client_up || (sleep 10; client_up) || (sleep 10; client_up) || error "reconnect failed"
rm -f $DIR/$tfile
fail $SINGLEMDS # verify MDS last_rcvd can be loaded
}
run_test 28 "handle error adding new clients (bug 6086)"
test_29a() { # bug 22273 - error adding new clients
#define OBD_FAIL_TGT_CLIENT_ADD 0x711
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000711"
# fail abort so client will be new again
fail_abort $SINGLEMDS
client_up || error "reconnect failed"
wait_osc_import_state $SINGLEMDS ost FULL
return 0
}
run_test 29a "error adding new clients doesn't cause LBUG (bug 22273)"
test_29b() { # bug 22273 - error adding new clients
#define OBD_FAIL_TGT_CLIENT_ADD 0x711
do_facet ost1 "lctl set_param fail_loc=0x80000711"
# fail abort so client will be new again
fail_abort ost1
client_up || error "reconnect failed"
return 0
}
run_test 29b "error adding new clients doesn't cause LBUG (bug 22273)"
test_50() {
mkdir -p $DIR/$tdir
# put a load of file creates/writes/deletes
writemany -q $DIR/$tdir/$tfile 0 5 &
CLIENT_PID=$!
echo writemany pid $CLIENT_PID
sleep 10
FAILURE_MODE="SOFT"
fail $SINGLEMDS
# wait for client to reconnect to MDS
sleep 60
fail $SINGLEMDS
sleep 60
fail $SINGLEMDS
# client process should see no problems even though MDS went down
sleep $TIMEOUT
kill -USR1 $CLIENT_PID
wait $CLIENT_PID
rc=$?
echo writemany returned $rc
#these may fail because of eviction due to slow AST response.
[ $rc -eq 0 ] ||
error_ignore bz13652 "writemany returned rc $rc" || true
}
run_test 50 "failover MDS under load"
test_51() {
#define OBD_FAIL_MDS_SYNC_CAPA_SL 0x1310
do_facet ost1 lctl set_param fail_loc=0x00001310
mkdir_on_mdt0 $DIR/$tdir
# put a load of file creates/writes/deletes
writemany -q $DIR/$tdir/$tfile 0 5 &
CLIENT_PID=$!
sleep 1
FAILURE_MODE="SOFT"
facet_failover $SINGLEMDS
# failover at various points during recovery
SEQ="1 5 10 $(seq $TIMEOUT 5 $(($TIMEOUT+10)))"
echo will failover at $SEQ
for i in $SEQ; do
#echo failover in $i sec
log "$TESTNAME: failover in $i sec"
sleep $i
facet_failover $SINGLEMDS
done
# client process should see no problems even though MDS went down
# and recovery was interrupted
sleep $TIMEOUT
kill -USR1 $CLIENT_PID
wait $CLIENT_PID
rc=$?
echo writemany returned $rc
[ $rc -eq 0 ] ||
error_ignore bz13652 "writemany returned rc $rc" || true
}
run_test 51 "failover MDS during recovery"
test_52_guts() {
do_facet client "mkdir -p $DIR/$tdir"
do_facet client "writemany -q -a $DIR/$tdir/$tfile 300 5" &
CLIENT_PID=$!
echo writemany pid $CLIENT_PID
sleep 10
FAILURE_MODE="SOFT"
fail ost1
rc=0
wait $CLIENT_PID || rc=$?
# active client process should see an EIO for down OST
[ $rc -eq 5 ] && { echo "writemany correctly failed $rc" && return 0; }
# but timing or failover setup may allow success
[ $rc -eq 0 ] && { echo "writemany succeeded" && return 0; }
echo "writemany returned $rc"
return $rc
}
test_52() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
mkdir -p $DIR/$tdir
test_52_guts
rc=$?
[ $rc -ne 0 ] && { return $rc; }
# wait for client to reconnect to OST
sleep 30
test_52_guts
rc=$?
[ $rc -ne 0 ] && { return $rc; }
sleep 30
test_52_guts
rc=$?
client_reconnect
#return $rc
}
run_test 52 "failover OST under load"
# test of open reconstruct
test_53a() {
touch $DIR/$tfile
drop_mdt_ldlm_reply "openfile -f O_RDWR:O_CREAT -m 0755 $DIR/$tfile" ||\
return 2
}
run_test 53a "touch: drop rep"
test_53b() {
touch $DIR/$tfile
sync
drop_mdt_ldlm_reply "openfile -f O_RDWR:O_CREAT -m 0755 $DIR/$tfile" ||
return 2
}
run_test 53b "touch: drop rep"
test_53c() {
rm -rf $DIR/$tfile
sync
drop_mdt_ldlm_reply "openfile -f O_RDWR:O_CREAT -m 0755 $DIR/$tfile" ||
return 2
}
run_test 53c "touch: drop rep"
test_54() {
zconf_mount $(hostname) $MOUNT2
touch $DIR/$tfile
touch $DIR2/$tfile.1
sleep 10
cat $DIR2/$tfile.missing # save transno = 0, rc != 0 into last_rcvd
fail $SINGLEMDS
umount $MOUNT2
ERROR=$(dmesg | grep -E "(test 54|went back in time)" | tail -n1 |
grep "went back in time")
[ x"$ERROR" == x ] || error "back in time occured"
}
run_test 54 "back in time"
# bug 11330 - liblustre application death during I/O locks up OST
test_55() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
mkdir -p $DIR/$tdir
# This test assumes relatively small max_dirty_mb setting
# which we want to walk away from, so just for it we will
# temporarily lower the value
local max_dirty_mb=$(lctl get_param -n osc.*.max_dirty_mb | head -n 1)
lctl set_param -n osc.*.max_dirty_mb=32
stack_trap "lctl set_param osc.*.max_dirty_mb=$max_dirty_mb" EXIT
# Minimum pass speed is 2MBps
local ddtimeout=64
# LU-2887/LU-3089 - set min pass speed to 500KBps
[ "$ost1_FSTYPE" = zfs ] && ddtimeout=256
# first dd should be finished quickly
$LFS setstripe -c 1 -i 0 $DIR/$tdir/$tfile-1
dd if=/dev/zero of=$DIR/$tdir/$tfile-1 bs=32M count=4 &
DDPID=$!
count=0
echo "step1: testing ......"
while kill -0 $DDPID 2> /dev/null; do
let count++
if [ $count -gt $ddtimeout ]; then
error "dd should be finished!"
fi
sleep 1
done
echo "(dd_pid=$DDPID, time=$count)successful"
$LFS setstripe -c 1 -i 0 $DIR/$tdir/$tfile-2
#define OBD_FAIL_OST_DROP_REQ 0x21d
do_facet ost1 lctl set_param fail_loc=0x0000021d
# second dd will be never finished
dd if=/dev/zero of=$DIR/$tdir/$tfile-2 bs=32M count=4 &
DDPID=$!
count=0
echo "step2: testing ......"
while [ $count -le $ddtimeout ]; do
if ! kill -0 $DDPID 2> /dev/null; then
ls -l $DIR/$tdir
error "dd shouldn't be finished! (time=$count)"
fi
let count++
sleep 1
done
echo "(dd_pid=$DDPID, time=$count)successful"
#Recover fail_loc and dd will finish soon
do_facet ost1 lctl set_param fail_loc=0
count=0
echo "step3: testing ......"
while kill -0 $DDPID 2> /dev/null; do
let count++
if [ $count -gt $((ddtimeout + 440)) ]; then
error "dd should be finished!"
fi
sleep 1
done
echo "(dd_pid=$DDPID, time=$count)successful"
rm -rf $DIR/$tdir
}
run_test 55 "ost_brw_read/write drops timed-out read/write request"
test_56() { # b=11277
#define OBD_FAIL_MDS_RESEND 0x136
touch $DIR/$tfile
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000136"
stat $DIR/$tfile || error "stat failed"
do_facet $SINGLEMDS "lctl set_param fail_loc=0"
rm -f $DIR/$tfile
}
run_test 56 "do not fail on getattr resend"
test_57_helper() {
# no oscs means no client or mdt
while lctl get_param osc.*.* > /dev/null 2>&1; do
: # loop until proc file is removed
done
}
test_57() { # bug 10866
test_57_helper &
pid=$!
sleep 1
#define OBD_FAIL_LPROC_REMOVE 0xB00
lctl set_param fail_loc=0x80000B00
zconf_umount `hostname` $DIR
lctl set_param fail_loc=0x80000B00
fail_abort $SINGLEMDS
kill -9 $pid
lctl set_param fail_loc=0
mount_client $DIR
do_facet client "df $DIR"
}
run_test 57 "read procfs entries causes kernel crash"
test_58() { # bug 11546
#define OBD_FAIL_MDC_ENQUEUE_PAUSE 0x801
touch $DIR/$tfile
ls -la $DIR/$tfile
lctl set_param fail_loc=0x80000801
cp $DIR/$tfile /dev/null &
pid=$!
sleep 1
lctl set_param fail_loc=0
drop_bl_callback_once rm -f $DIR/$tfile
wait $pid
# the first 'df' could tigger the eviction caused by
# 'drop_bl_callback_once', and it's normal case.
# but the next 'df' should return successfully.
do_facet client "df $DIR" || do_facet client "df $DIR"
}
run_test 58 "Eviction in the middle of open RPC reply processing"
test_59() { # bug 10589
zconf_mount `hostname` $MOUNT2 || error "Failed to mount $MOUNT2"
echo $DIR2 | grep -q $MOUNT2 || error "DIR2 is not set properly: $DIR2"
#define OBD_FAIL_LDLM_CANCEL_EVICT_RACE 0x311
lctl set_param fail_loc=0x311
writes=$(LANG=C dd if=/dev/zero of=$DIR2/$tfile count=1 2>&1)
[ $? = 0 ] || error "dd write failed"
writes=$(echo $writes | awk -F '+' '/out/ {print $1}')
lctl set_param fail_loc=0
sync
zconf_umount `hostname` $MOUNT2 -f
reads=$(LANG=C dd if=$DIR/$tfile of=/dev/null 2>&1)
[ $? = 0 ] || error "dd read failed"
reads=$(echo $reads | awk -F '+' '/in/ {print $1}')
[ "$reads" -eq "$writes" ] || error "read" $reads "blocks, must be" $writes
}
run_test 59 "Read cancel race on client eviction"
test_60() {
local num_files=${COUNT:-5000}
test_mkdir $DIR/$tdir
# Register (and start) changelog
changelog_register || error "changelog_register failed"
# Generate a large number of changelog entries
createmany -o $DIR/$tdir/$tfile $num_files
sync
sleep 5
# Unlink files in the background
unlinkmany $DIR/$tdir/$tfile $num_files &
local client_pid=$!
sleep 1
# Failover the MDS while unlinks are happening
facet_failover $SINGLEMDS
# Wait for unlinkmany to finish
wait $client_pid
# Check if all the create/unlink events were recorded
# in the changelog
local cl_count=$(changelog_dump | grep -c UNLNK)
echo "$cl_count unlinks in changelog"
changelog_deregister || error "changelog_deregister failed"
if ! changelog_users $SINGLEMDS | grep -q "^cl"; then
[ $cl_count -eq $num_files ] ||
error "Recorded $cl_count of $num_files unlinks"
# Also make sure we can clear large changelogs
cl_count=$(changelog_dump | wc -l)
[ $cl_count -le 2 ] ||
error "Changelog not empty: $cl_count entries"
else # If other users, there may be other unlinks in the log
[ $cl_count -ge $num_files ] ||
error "Recorded $cl_count of $num_files unlinks"
changelog_users $SINGLEMDS
echo "other changelog users; can't verify clear"
fi
}
run_test 60 "Add Changelog entries during MDS failover"
test_61()
{
local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0000)
mdtosc=${mdtosc/-MDT*/-MDT\*}
local cflags="osc.$mdtosc.connect_flags"
do_facet $SINGLEMDS "lctl get_param -n $cflags" |grep -q skip_orphan
[ $? -ne 0 ] && skip "don't have skip orphan feature" && return
mkdir_on_mdt0 $DIR/$tdir || error "mkdir dir $DIR/$tdir failed"
# Set the default stripe of $DIR/$tdir to put the files to ost1
$LFS setstripe -c 1 -i 0 $DIR/$tdir
replay_barrier $SINGLEMDS
createmany -o $DIR/$tdir/$tfile-%d 10
local oid=$(do_facet ost1 "lctl get_param -n \
obdfilter.${ost1_svc}.last_id" | sed -e 's/.*://')
fail_abort $SINGLEMDS
touch $DIR/$tdir/$tfile
local id=$($LFS getstripe $DIR/$tdir/$tfile |
awk '$1 == 0 { print $2 }')
[ $id -le $oid ] && error "the orphan objid was reused, failed"
# Cleanup
rm -rf $DIR/$tdir
}
run_test 61 "Verify to not reuse orphan objects - bug 17025"
# test_62 as seen it b2_1 please do not reuse test_62
#test_62()
#{
# zconf_umount `hostname` $DIR
# #define OBD_FAIL_PTLRPC_DELAY_IMP_FULL 0x516
# lctl set_param fail_loc=0x516
# mount_client $DIR
#}
#run_test 62 "Verify connection flags race - bug LU-1716"
test_65() {
mount_client $DIR2
#grant lock1, export2
$LFS setstripe -i -0 $DIR2/$tfile || error "setstripe failed"
$MULTIOP $DIR2/$tfile Ow || error "multiop failed"
#define OBD_FAIL_LDLM_BL_EVICT 0x31e
do_facet ost $LCTL set_param fail_loc=0x31e
#get waiting lock2, export1
$MULTIOP $DIR/$tfile Ow &
PID1=$!
# let enqueue to get asleep
sleep 2
#get lock2 blocked
$MULTIOP $DIR2/$tfile Ow &
PID2=$!
sleep 2
#evict export1
ost_evict_client
sleep 2
do_facet ost $LCTL set_param fail_loc=0
wait $PID1
wait $PID2
umount_client $DIR2
}
run_test 65 "lock enqueue for destroyed export"
test_66()
{
[[ "$MDS1_VERSION" -ge $(version_code 2.7.51) ]] ||
skip "Need MDS version at least 2.7.51"
# modify dir so that next revalidate would not obtain UPDATE lock
touch $DIR
# drop 1 reply with UPDATE lock
mcreate $DIR/$tfile || error "mcreate failed: $?"
drop_mdt_ldlm_reply_once "stat $DIR/$tfile" &
sleep 2
# make the re-sent lock to sleep
#define OBD_FAIL_MDS_RESEND 0x136
do_nodes $(osts_nodes) $LCTL set_param fail_loc=0x80000136
#initiate the re-connect & re-send
local mdtname="MDT0000"
local mdccli=$($LCTL dl | grep "${mdtname}-mdc" | awk '{print $4;}')
local conn_uuid=$($LCTL get_param -n mdc.${mdccli}.conn_uuid)
$LCTL set_param "mdc.${mdccli}.import=connection=${conn_uuid}"
sleep 2
#initiate the client eviction while enqueue re-send is in progress
mds_evict_client
client_reconnect
wait
}
run_test 66 "lock enqueue re-send vs client eviction"
test_67()
{
#define OBD_FAIL_PTLRPC_CONNECT_RACE 0x531
$LCTL set_param fail_loc=0x80000531
local mdtname="MDT0000"
local mdccli=$($LCTL dl | grep "${mdtname}-mdc" | awk '{print $4;}')
local conn_uuid=$($LCTL get_param -n mdc.${mdccli}.mds_conn_uuid)
$LCTL set_param "mdc.${mdccli}.import=connection=${conn_uuid}" &
sleep 2
mds_evict_client
sleep 1
client_reconnect
wait
}
run_test 67 "connect vs import invalidate race"
check_cli_ir_state()
{
local NODE=${1:-$HOSTNAME}
local st
st=$(do_node $NODE "lctl get_param mgc.*.ir_state |
awk '/imperative_recovery:/ { print \\\$2}'")
[ $st != ON -o $st != OFF -o $st != ENABLED -o $st != DISABLED ] ||
error "Error state $st, must be ENABLED or DISABLED"
echo -n $st
}
check_target_ir_state()
{
local target=${1}
local name=${target}_svc
local recovery_proc=obdfilter.${!name}.recovery_status
local st
while : ; do
st=$(do_facet $target "$LCTL get_param -n $recovery_proc |
awk '/status:/{ print \\\$2}'")
[ x$st = xRECOVERING ] || break
done
st=$(do_facet $target "lctl get_param -n $recovery_proc |
awk '/IR:/{ print \\\$2}'")
[ $st != ON -o $st != OFF -o $st != ENABLED -o $st != DISABLED ] ||
error "Error state $st, must be ENABLED or DISABLED"
echo -n $st
}
set_ir_status()
{
do_facet mgs lctl set_param -n mgs.MGS.live.$FSNAME="state=$1"
}
get_ir_status()
{
local state=$(do_facet mgs "lctl get_param -n mgs.MGS.live.$FSNAME |
awk '/state:/{ print \\\$2 }'")
echo -n ${state/,/}
}
nidtbl_version_mgs()
{
local ver=$(do_facet mgs "lctl get_param -n mgs.MGS.live.$FSNAME |
awk '/nidtbl_version:/{ print \\\$2 }'")
echo -n $ver
}
# nidtbl_version_client <mds1|client> [node]
nidtbl_version_client()
{
local cli=$1
local node=${2:-$HOSTNAME}
if [ X$cli = Xclient ]; then
cli=$FSNAME-client
else
local obdtype=${cli/%[0-9]*/}
[ $obdtype != mds ] && error "wrong parameters $cli"
node=$(facet_active_host $cli)
local t=${cli}_svc
cli=${!t}
fi
local vers=$(do_node $node "lctl get_param -n mgc.*.ir_state" |
awk "/$cli/{print \$6}" |sort -u)
# in case there are multiple mounts on the client node
local arr=($vers)
[ ${#arr[@]} -ne 1 ] && error "versions on client node mismatch"
echo -n $vers
}
nidtbl_versions_match()
{
[ $(nidtbl_version_mgs) -eq $(nidtbl_version_client ${1:-client}) ]
}
target_instance_match()
{
local srv=$1
local obdtype
local cliname
obdtype=${srv/%[0-9]*/}
case $obdtype in
mds)
obdname="mdt"
cliname="mdc"
;;
ost)
obdname="obdfilter"
cliname="osc"
;;
*)
error "invalid target type" $srv
return 1
;;
esac
local target=${srv}_svc
local si=$(do_facet $srv lctl get_param -n $obdname.${!target}.instance)
local ci=$(lctl get_param -n $cliname.${!target}-${cliname}-*.import |
awk '/instance/{ print $2 }' | head -n1)
return $([ $si -eq $ci ])
}
test_100()
{
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
{ skip "MGS without IR support"; return 0; }
# MDT was just restarted in the previous test, make sure everything
# is all set.
local cnt=30
while [ $cnt -gt 0 ]; do
nidtbl_versions_match && break
sleep 1
cnt=$((cnt - 1))
done
# disable IR
set_ir_status disabled
local prev_ver=$(nidtbl_version_client client)
local saved_FAILURE_MODE=$FAILURE_MODE
[ $(facet_host mgs) = $(facet_host ost1) ] && FAILURE_MODE="SOFT"
fail ost1
# valid check
[ $(nidtbl_version_client client) -eq $prev_ver ] ||
error "version must not change due to IR disabled"
target_instance_match ost1 || error "instance mismatch"
# restore env
set_ir_status full
FAILURE_MODE=$saved_FAILURE_MODE
}
run_test 100 "IR: Make sure normal recovery still works w/o IR"
test_101a()
{
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
skip "MGS without IR support"
set_ir_status full
local ost1_imp=$(get_osc_import_name client ost1)
# disable pinger recovery
lctl set_param -n osc.$ost1_imp.pinger_recov=0
stack_trap "$LCTL set_param -n osc.$ost1_imp.pinger_recov=1" EXIT
fail ost1
target_instance_match ost1 || error "instance mismatch"
nidtbl_versions_match || error "version must match"
}
run_test 101a "IR: Make sure IR works w/o normal recovery"
test_101b()
{
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
skip "MGS without IR support"
set_ir_status full
local ost1_imp=$(get_osc_import_name client ost1)
#define OBD_FAIL_OST_PREPARE_DELAY 0x247
do_facet ost1 "$LCTL set_param fail_loc=0x247"
# disable pinger recovery
$LCTL set_param -n osc.$ost1_imp.pinger_recov=0
stack_trap "$LCTL set_param -n osc.$ost1_imp.pinger_recov=1" EXIT
#OST may return EAGAIN if it is not configured yet
fail ost1
}
run_test 101b "IR: Make sure IR works w/o normal recovery and proceed EAGAIN"
test_102()
{
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
{ skip "MGS without IR support"; return 0; }
local clients=${CLIENTS:-$HOSTNAME}
local old_version
local new_version
local mgsdev=mgs
set_ir_status full
# let's have a new nidtbl version
fail ost1
# sleep for a while so that clients can see the failure of ost
# it must be MGC_TIMEOUT_MIN_SECONDS + MGC_TIMEOUT_RAND_CENTISEC.
# int mgc_request.c:
# define MGC_TIMEOUT_MIN_SECONDS 5
# define MGC_TIMEOUT_RAND_CENTISEC 0x1ff /* ~500 *
local count=30 # 20 seconds at most
while [ $count -gt 0 ]; do
nidtbl_versions_match && break
sleep 1
count=$((count-1))
done
nidtbl_versions_match || error "nidtbl mismatch"
# get the version #
old_version=$(nidtbl_version_client client)
zconf_umount_clients $clients $MOUNT || error "Cannot umount client"
# restart mgs
combined_mgs_mds && mgsdev=mds1
remount_facet $mgsdev
fail ost1
zconf_mount_clients $clients $MOUNT || error "Cannot mount client"
# check new version
new_version=$(nidtbl_version_client client)
[ $new_version -lt $old_version ] &&
error "nidtbl version wrong after mgs restarts"
return 0
}
run_test 102 "IR: New client gets updated nidtbl after MGS restart"
test_103()
{
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
{ skip "MGS without IR support"; return 0; }
combined_mgs_mds && skip "needs separate mgs and mds" && return 0
# workaround solution to generate config log on the mds
remount_facet mds1
stop mgs
stop mds1
# We need this test because mds is like a client in IR context.
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS ||
error "MDS should start w/o mgs"
# start mgs and remount mds w/ ir
start mgs $(mgsdevname) $MGS_MOUNT_OPTS
clients_up
# remount client so that fsdb will be created on the MGS
umount_client $MOUNT || error "umount failed"
mount_client $MOUNT || error "mount failed"
# sleep 30 seconds so the MDS has a chance to detect MGS restarting
local count=30
while [ $count -gt 0 ]; do
[ $(nidtbl_version_client mds1) -ne 0 ] && break
sleep 1
count=$((count-1))
done
# after a while, mds should be able to reconnect to mgs and fetch
# up-to-date nidtbl version
nidtbl_versions_match mds1 || error "mds nidtbl mismatch"
# reset everything
set_ir_status full
}
run_test 103 "IR: MDS can start w/o MGS and get updated nidtbl later"
test_104()
{
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
{ skip "MGS without IR support"; return 0; }
set_ir_status full
stop ost1
start ost1 $(ostdevname 1) "$OST_MOUNT_OPTS -onoir" ||
error "OST1 cannot start"
clients_up
local ir_state=$(check_target_ir_state ost1)
[ $ir_state = "DISABLED" -o $ir_state = "OFF" ] ||
error "ir status on ost1 should be DISABLED"
}
run_test 104 "IR: ost can disable IR voluntarily"
test_105()
{
[ -z "$RCLIENTS" ] && skip "Needs multiple clients" && return 0
do_facet mgs $LCTL list_param mgs.*.ir_timeout ||
{ skip "MGS without IR support"; return 0; }
set_ir_status full
# get one of the clients from client list
local rcli=$(echo $RCLIENTS |cut -d' ' -f 1)
local mount_opts=${MOUNT_OPTS:+$MOUNT_OPTS,}noir
zconf_umount $rcli $MOUNT || error "umount failed"
zconf_mount $rcli $MOUNT $mount_opts || error "mount failed"
# make sure lustre mount at $rcli disabling IR
local ir_state=$(check_cli_ir_state $rcli)
[ $ir_state = "DISABLED" -o $ir_state = "OFF" ] ||
error "IR state must be DISABLED at $rcli"
# Since the client just mounted, its last_rcvd entry is not on disk.
# Send an RPC so exp_need_sync forces last_rcvd to commit this export
# so the client can reconnect during OST recovery (LU-924, LU-1582)
$LFS setstripe -i 0 $DIR/$tfile
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 conv=sync
# make sure MGS's state is Partial
[ $(get_ir_status) = "partial" ] || error "MGS IR state must be partial"
fail ost1
# make sure IR on ost1 is DISABLED
local ir_state=$(check_target_ir_state ost1)
[ $ir_state = "DISABLED" -o $ir_state = "OFF" ] ||
error "IR status on ost1 should be DISABLED"
# remount with the default MOUNT_OPTS
zconf_umount $rcli $MOUNT || error "umount failed"
zconf_mount $rcli $MOUNT || error "mount failed"
# make sure MGS's state is full
[ $(get_ir_status) = "full" ] || error "MGS IR status must be full"
fail ost1
# make sure IR on ost1 is ENABLED
local ir_state=$(check_target_ir_state ost1)
[ $ir_state = "ENABLED" -o $ir_state = "ON" ] ||
error "IR status on ost1 should be ENABLED"
return 0
}
run_test 105 "IR: NON IR clients support"
cleanup_106() {
trap 0
umount_client $DIR2
debugrestore
}
test_106() { # LU-1789
[[ "$MDS1_VERSION" -ge $(version_code 2.3.50) ]] ||
skip "Need MDS version at least 2.3.50"
#define OBD_FAIL_MDC_LIGHTWEIGHT 0x805
$LCTL set_param fail_loc=0x805
debugsave
trap cleanup_106 EXIT
# enable lightweight flag on mdc connection
mount_client $DIR2
local MDS_NEXP=$(do_facet $SINGLEMDS \
lctl get_param -n mdt.${mds1_svc}.num_exports |
cut -d' ' -f2)
$LCTL set_param fail_loc=0
touch $DIR2/$tfile || error "failed to create empty file"
replay_barrier $SINGLEMDS
$LCTL set_param debug=ha
$LCTL clear
facet_failover $SINGLEMDS
# lightweight goes through LUSTRE_IMP_RECOVER during failover
touch -c $DIR2/$tfile || true
$LCTL dk $TMP/lustre-log-$TESTNAME.log
recovered=$(awk '/MDT0000-mdc-[0-9a-f]*. lwp recover/ { print }' \
$TMP/lustre-log-$TESTNAME.log)
[ -z "$recovered" ] && error "lightweight client was not recovered"
# and all operations performed by lightweight client should be
# synchronous, so the file created before mds restart should be there
$CHECKSTAT -t file $DIR/$tfile || error "file not present"
rm -f $DIR/$tfile
cleanup_106
}
run_test 106 "lightweight connection support"
test_107 () {
local CLIENT_PID
local close_pid
mkdir_on_mdt0 $DIR/$tdir
# OBD_FAIL_MDS_REINT_NET_REP 0x119
do_facet $SINGLEMDS lctl set_param fail_loc=0x119
multiop $DIR/$tdir D_c &
close_pid=$!
mkdir $DIR/$tdir/dir_106 &
CLIENT_PID=$!
do_facet $SINGLEMDS lctl set_param fail_loc=0
fail $SINGLEMDS
wait $CLIENT_PID || rc=$?
checkstat -t dir $DIR/$tdir/dir_106 || return 1
kill -USR1 $close_pid
wait $close_pid || return 2
return $rc
}
run_test 107 "drop reint reply, then restart MDT"
test_108() {
mkdir -p $DIR/$tdir
$LFS setstripe -c 1 -i 0 $DIR/$tdir
dd if=/dev/zero of=$DIR/$tdir/$tfile bs=1M count=256 &
local dd_pid=$!
sleep 0.1
ost_evict_client
wait $dd_pid
client_up || error "reconnect failed"
rm -f $DIR/$tdir/$tfile
}
run_test 108 "client eviction don't crash"
test_110a () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local remote_dir=$DIR/$tdir/remote_dir
local mdtidx=1
local num
#prepare for 110 test, which need set striped dir on remote MDT.
for num in $(seq $MDSCOUNT); do
do_facet mds$num \
lctl set_param -n mdt.$FSNAME*.enable_remote_dir=1 \
2>/dev/null
done
mkdir_on_mdt0 $DIR/$tdir
drop_request "$LFS mkdir -i $mdtidx -c2 $remote_dir" ||
error "lfs mkdir failed"
local diridx=$($LFS getstripe -m $remote_dir)
[ $diridx -eq $mdtidx ] || error "$diridx != $mdtidx"
rm -rf $DIR/$tdir || error "rmdir failed"
}
run_test 110a "create remote directory: drop client req"
test_110b () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local remote_dir=$DIR/$tdir/remote_dir
local mdtidx=1
mkdir_on_mdt0 $DIR/$tdir
drop_reint_reply "$LFS mkdir -i $mdtidx -c2 $remote_dir" ||
error "lfs mkdir failed"
diridx=$($LFS getstripe -m $remote_dir)
[ $diridx -eq $mdtidx ] || error "$diridx != $mdtidx"
rm -rf $DIR/$tdir || error "rmdir failed"
}
run_test 110b "create remote directory: drop Master rep"
test_110c () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local remote_dir=$DIR/$tdir/remote_dir
local mdtidx=1
mkdir_on_mdt0 $DIR/$tdir
drop_update_reply $mdtidx "$LFS mkdir -i $mdtidx -c2 $remote_dir" ||
error "lfs mkdir failed"
diridx=$($LFS getstripe -m $remote_dir)
[ $diridx -eq $mdtidx ] || error "$diridx != $mdtidx"
rm -rf $DIR/$tdir || error "rmdir failed"
}
run_test 110c "create remote directory: drop update rep on slave MDT"
test_110d () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local remote_dir=$DIR/$tdir/remote_dir
local MDTIDX=1
mkdir_on_mdt0 $DIR/$tdir
$LFS mkdir -i $MDTIDX -c2 $remote_dir || error "lfs mkdir failed"
drop_request "rm -rf $remote_dir" || error "rm remote dir failed"
rm -rf $DIR/$tdir || error "rmdir failed"
return 0
}
run_test 110d "remove remote directory: drop client req"
test_110e () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local remote_dir=$DIR/$tdir/remote_dir
local MDTIDX=1
mkdir_on_mdt0 $DIR/$tdir
$LFS mkdir -i $MDTIDX -c2 $remote_dir || error "lfs mkdir failed"
drop_reint_reply "rm -rf $remote_dir" || error "rm remote dir failed"
rm -rf $DIR/$tdir || error "rmdir failed"
return 0
}
run_test 110e "remove remote directory: drop master rep"
test_110f () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
local remote_dir=$DIR/$tdir/remote_dir
local MDTIDX=1
mkdir_on_mdt0 $DIR/$tdir
$LFS mkdir -i $MDTIDX -c2 $remote_dir || error "lfs mkdir failed"
drop_update_reply $MDTIDX "rm -rf $remote_dir" ||
error "rm remote dir failed"
rm -rf $DIR/$tdir || error "rmdir failed"
}
run_test 110f "remove remote directory: drop slave rep"
test_110g () {
[[ "$MDS1_VERSION" -ge $(version_code 2.11.0) ]] ||
skip "Need MDS version at least 2.11.0"
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
mkdir_on_mdt0 $DIR/$tdir
touch $DIR/$tdir/$tfile
# OBD_FAIL_MDS_REINT_NET_REP 0x119
do_facet mds1 $LCTL set_param fail_loc=0x119
$LFS migrate -m 1 $DIR/$tdir &
migrate_pid=$!
sleep 5
do_facet mds1 $LCTL set_param fail_loc=0
wait $migrate_pid
local mdt_index
mdt_index=$($LFS getstripe -m $DIR/$tdir)
[ $mdt_index == 1 ] || error "$tdir is not on MDT1"
mdt_index=$($LFS getstripe -m $DIR/$tdir/$tfile)
[ $mdt_index == 1 ] || error "$tfile is not on MDT1"
rm -rf $DIR/$tdir || error "rmdir failed"
}
run_test 110g "drop reply during migration"
test_110h () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
[[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
skip "Need MDS version at least 2.7.56"
local src_dir=$DIR/$tdir/source_dir
local tgt_dir=$DIR/$tdir/target_dir
local MDTIDX=1
mkdir -p $src_dir
$LFS mkdir -i $MDTIDX $tgt_dir
dd if=/etc/hosts of=$src_dir/src_file
touch $tgt_dir/tgt_file
drop_update_reply $MDTIDX \
"mrename $src_dir/src_file $tgt_dir/tgt_file" ||
error "mrename failed"
$CHECKSTAT -t file $src_dir/src_file &&
error "src_file present after rename"
diff /etc/hosts $tgt_dir/tgt_file ||
error "file changed after rename"
}
run_test 110h "drop update reply during cross-MDT file rename"
test_110i () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
[[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
skip "Need MDS version at least 2.7.56"
local src_dir=$DIR/$tdir/source_dir
local tgt_dir=$DIR/$tdir/target_dir
local MDTIDX=1
mkdir -p $src_dir
$LFS mkdir -i $MDTIDX $tgt_dir
mkdir $src_dir/src_dir
touch $src_dir/src_dir/a
mkdir $tgt_dir/tgt_dir
drop_update_reply $MDTIDX \
"mrename $src_dir/src_dir $tgt_dir/tgt_dir" ||
error "mrename failed"
$CHECKSTAT -t dir $src_dir/src_dir &&
error "src_dir present after rename"
$CHECKSTAT -t dir $tgt_dir/tgt_dir ||
error "tgt_dir not present after rename"
$CHECKSTAT -t file $tgt_dir/tgt_dir/a ||
error "a not present after rename"
}
run_test 110i "drop update reply during cross-MDT dir rename"
test_110j () {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
[[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
skip "Need MDS version at least 2.7.56"
local remote_dir=$DIR/$tdir/remote_dir
local local_dir=$DIR/$tdir/local_dir
local MDTIDX=1
mkdir_on_mdt0 $DIR/$tdir
mkdir $DIR/$tdir/local_dir
$LFS mkdir -i $MDTIDX $remote_dir
touch $local_dir/local_file
drop_update_reply $MDTIDX \
"ln $local_dir/local_file $remote_dir/remote_file" ||
error "ln failed"
$CHECKSTAT -t file $remote_dir/remote_file ||
error "remote not present after ln"
}
run_test 110j "drop update reply during cross-MDT ln"
test_110k() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTS"
[[ "$MDS1_VERSION" -ge $(version_code 2.12.55) ]] ||
skip "Need MDS version at least 2.12.55"
umount $MOUNT
stop mds2 || error "stop mds2 failed"
#define OBD_FAIL_FLD_QUERY_REQ 0x1103
do_facet mds2 lctl set_param fail_loc=0x80001103
local OPTS="$MDS_MOUNT_OPTS -o abort_recovery"
start mds2 $(mdsdevname 2) $OPTS ||
error "start MDS with abort_recovery should succeed"
do_facet mds2 lctl set_param fail_loc=0
# cleanup
stop mds2 || error "cleanup: stop mds2 failed"
start mds2 $(mdsdevname 2) $MDS_MOUNT_OPTS ||
error "cleanup: start mds2 failed"
zconf_mount $(hostname) $MOUNT || error "cleanup: mount failed"
client_up || error "post-failover df failed"
all_mds_up
}
run_test 110k "FID_QUERY failed during recovery"
test_110m () {
(( $(lustre_version_code $SINGLEMDS) >= $(version_code 2.14.52) )) ||
skip "Need MDS version at least 2.14.52"
(( $MDSCOUNT >= 2 )) || skip "needs at least 2 MDTs"
local remote_dir=$DIR/$tdir/remote_dir
local mdccli
local uuid
local diridx
mkdir_on_mdt0 $DIR/$tdir
#define OBD_FAIL_PTLRPC_RESEND_RACE 0x0525
do_facet mds1 $LCTL set_param fail_loc=0x80000525
$LFS mkdir -i 1 -c2 $remote_dir &
mkdir_pid=$!
sleep 3
# initiate the re-connect & re-send
mdccli=$(do_facet mds2 $LCTL dl |
awk '/MDT0000-osp-MDT0001/ {print $4;}')
uuid=$(do_facet mds2 $LCTL get_param -n osp.$mdccli.mdt_conn_uuid)
echo "conn_uuid=$uuid"
do_facet mds2 $LCTL set_param "osp.$mdccli.import=connection=$uuid"
wait $mkdir_pid
(( $? == 0 )) || error "mkdir failed"
diridx=$($LFS getstripe -m $remote_dir)
(( $diridx == 1 )) || error "$diridx != 1"
rm -rf $DIR/$tdir || error "rmdir failed"
}
run_test 110m "update resent vs original RPC race"
# LU-2844 mdt prepare fail should not cause umount oops
test_111 ()
{
[[ "$MDS1_VERSION" -ge $(version_code 2.3.62) ]] ||
skip "Need MDS version at least 2.3.62"
#define OBD_FAIL_MDS_CHANGELOG_INIT 0x151
do_facet $SINGLEMDS lctl set_param fail_loc=0x151
stop $SINGLEMDS || error "stop MDS failed"
start $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) $MDS_MOUNT_OPTS &&
error "start MDS should fail"
do_facet $SINGLEMDS lctl set_param fail_loc=0
start $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) $MDS_MOUNT_OPTS ||
error "start MDS failed"
}
run_test 111 "mdd setup fail should not cause umount oops"
# LU-793
test_112a() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
do_facet_random_file client $TMP/$tfile 100K ||
error_noexit "Create random file $TMP/$tfile"
pause_bulk "cp $TMP/$tfile $DIR/$tfile" $TIMEOUT ||
error_noexit "Can't pause_bulk copy"
df $DIR
# expect cmp to succeed, client resent bulk
cmp $TMP/$tfile $DIR/$tfile ||
error_noexit "Wrong data has been written"
rm $DIR/$tfile ||
error_noexit "Can't remove file"
rm $TMP/$tfile
}
run_test 112a "bulk resend while orignal request is in progress"
test_115_read() {
local fail1=$1
local fail2=$2
df $DIR
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
cancel_lru_locks osc
# OST_READ = 3,
$LCTL set_param fail_loc=$fail1 fail_val=3
dd of=/dev/null if=$DIR/$tfile bs=4096 count=1 &
pid=$!
sleep 1
set_nodes_failloc "$(osts_nodes)" $fail2
wait $pid || error "dd failed"
return 0
}
test_115_write() {
local fail1=$1
local fail2=$2
local error=$3
local fail_val2=${4:-0}
df $DIR
touch $DIR/$tfile
# OST_WRITE = 4,
$LCTL set_param fail_loc=$fail1 fail_val=4
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=dsync &
pid=$!
sleep 1
df $MOUNT
set_nodes_failloc "$(osts_nodes)" $fail2 $fail_val2
wait $pid
rc=$?
[ $error -eq 0 ] && [ $rc -ne 0 ] && error "dd error ($rc)"
[ $error -ne 0 ] && [ $rc -eq 0 ] && error "dd success"
return 0
}
test_115a() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_REQ_UNLINK 0x51b
#define OBD_FAIL_PTLRPC_DROP_BULK 0x51a
test_115_read 0x8000051b 0x8000051a
}
run_test 115a "read: late REQ MDunlink and no bulk"
test_115b() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_REQ_UNLINK 0x51b
#define OBD_FAIL_OST_ENOSPC 0x215
# pass $OSTCOUNT for the fail_loc to be caught
# appropriately by the IO thread
test_115_write 0x8000051b 0x80000215 1 $OSTCOUNT
}
run_test 115b "write: late REQ MDunlink and no bulk"
test_115c() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_REPL_UNLINK 0x50f
#define OBD_FAIL_PTLRPC_DROP_BULK 0x51a
test_115_read 0x8000050f 0x8000051a
}
run_test 115c "read: late Reply MDunlink and no bulk"
test_115d() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_REPL_UNLINK 0x50f
#define OBD_FAIL_OST_ENOSPC 0x215
test_115_write 0x8000050f 0x80000215 0
}
run_test 115d "write: late Reply MDunlink and no bulk"
test_115e() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_BULK_UNLINK 0x510
#define OBD_FAIL_OST_ALL_REPLY_NET 0x211
test_115_read 0x80000510 0x80000211
}
run_test 115e "read: late Bulk MDunlink and no reply"
test_115f() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_REQ_UNLINK 0x51b
#define OBD_FAIL_OST_ALL_REPLY_NET 0x211
test_115_read 0x8000051b 0x80000211
}
run_test 115f "read: late REQ MDunlink and no reply"
test_115g() {
[ "$OST1_VERSION" -lt $(version_code 2.8.50) ] &&
skip "need at least 2.8.50 on OST"
#define OBD_FAIL_PTLRPC_LONG_BOTH_UNLINK 0x51c
test_115_read 0x8000051c 0
}
run_test 115g "read: late REQ MDunlink and Reply MDunlink"
# parameters: fail_loc CMD RC
test_120_reply() {
local PID
local PID2
local rc=5
local fail
#define OBD_FAIL_LDLM_CP_CB_WAIT2 0x320
#define OBD_FAIL_LDLM_CP_CB_WAIT3 0x321
#define OBD_FAIL_LDLM_CP_CB_WAIT4 0x322
#define OBD_FAIL_LDLM_CP_CB_WAIT5 0x323
echo
echo -n "** FLOCK REPLY vs. EVICTION race, lock $2"
[ "$1" = "CLEANUP" ] &&
fail=0x80000320 && echo ", $1 cp first"
[ "$1" = "REPLY" ] &&
fail=0x80000321 && echo ", $1 cp first"
[ "$1" = "DEADLOCK CLEANUP" ] &&
fail=0x80000322 && echo " DEADLOCK, CLEANUP cp first"
[ "$1" = "DEADLOCK REPLY" ] &&
fail=0x80000323 && echo " DEADLOCK, REPLY cp first"
if [ x"$2" = x"get" ]; then
#for TEST lock, take a conflict in advance
# sleep longer than evictor to not confuse fail_loc: 2+2+4
echo "** Taking conflict **"
flocks_test 5 set read sleep 10 $DIR/$tfile &
PID2=$!
sleep 2
fi
$LCTL set_param fail_loc=$fail
flocks_test 5 $2 write $DIR/$tfile &
PID=$!
sleep 2
echo "** Evicting and re-connecting client **"
mds_evict_client
client_reconnect
if [ x"$2" = x"get" ]; then
wait $PID2
fi
wait $PID
rc=$?
# check if the return value is allowed
[ $rc -eq $3 ] && rc=0
$LCTL set_param fail_loc=0
return $rc
}
# a lock is taken, unlock vs. cleanup_resource() race for destroying
# the ORIGINAL lock.
test_120_destroy()
{
local PID
flocks_test 5 set write sleep 4 $DIR/$tfile &
PID=$!
sleep 2
# let unlock to sleep in CP CB
$LCTL set_param fail_loc=$1
sleep 4
# let cleanup to cleep in CP CB
mds_evict_client
client_reconnect
wait $PID
rc=$?
$LCTL set_param fail_loc=0
return $rc
}
test_120() {
flock_is_enabled || { skip "mount w/o flock enabled" && return; }
touch $DIR/$tfile
test_120_reply "CLEANUP" set 5 || error "SET race failed"
test_120_reply "CLEANUP" get 5 || error "GET race failed"
test_120_reply "CLEANUP" unlock 5 || error "UNLOCK race failed"
test_120_reply "REPLY" set 5 || error "SET race failed"
test_120_reply "REPLY" get 5 || error "GET race failed"
test_120_reply "REPLY" unlock 5 || error "UNLOCK race failed"
# DEADLOCK tests
test_120_reply "DEADLOCK CLEANUP" set 5 || error "DEADLOCK race failed"
test_120_reply "DEADLOCK REPLY" set 35 || error "DEADLOCK race failed"
test_120_destroy 0x320 || error "unlock-cleanup race failed"
}
run_test 120 "flock race: completion vs. evict"
test_113() {
local BEFORE=$(date +%s)
local EVICT
# modify dir so that next revalidate would not obtain UPDATE lock
touch $DIR
# drop 1 reply with UPDATE lock,
# resend should not create 2nd lock on server
mcreate $DIR/$tfile || error "mcreate failed: $?"
drop_mdt_ldlm_reply_once "stat $DIR/$tfile" || error "stat failed: $?"
# 2 BL AST will be sent to client, both must find the same lock,
# race them to not get EINVAL for 2nd BL AST
#define OBD_FAIL_LDLM_PAUSE_CANCEL2 0x31f
$LCTL set_param fail_loc=0x8000031f
$LCTL set_param ldlm.namespaces.*.early_lock_cancel=0 > /dev/null
chmod 0777 $DIR/$tfile || error "chmod failed: $?"
$LCTL set_param ldlm.namespaces.*.early_lock_cancel=1 > /dev/null
# let the client reconnect
client_reconnect
EVICT=$($LCTL get_param mdc.$FSNAME-MDT*.state |
awk -F"[ [,]" '/EVICTED ]$/ { if (mx<$5) {mx=$5;} } END { print mx }')
[ -z "$EVICT" ] || [[ $EVICT -le $BEFORE ]] || error "eviction happened"
}
run_test 113 "ldlm enqueue dropped reply should not cause deadlocks"
T130_PID=0
test_130_base() {
test_mkdir -p -c1 $DIR/$tdir
local mdts=$(mdts_nodes)
# Prevent interference from layout intent RPCs due to
# asynchronous writeback. These will be tested in 130c below.
do_nodes ${CLIENTS:-$HOSTNAME} sync
# get only LOOKUP lock on $tdir
cancel_lru_locks mdc
ls $DIR/$tdir/$tfile 2>/dev/null
# get getattr by fid on $tdir
#
# we need to race with unlink, unlink must complete before we will
# take a DLM lock, otherwise unlink will wait until getattr will
# complete; but later than getattr starts so that getattr found
# the object
#define OBD_FAIL_MDS_INTENT_DELAY 0x160
set_nodes_failloc $mdts 0x80000160
stat $DIR/$tdir &
T130_PID=$!
sleep 2
rm -rf $DIR/$tdir
# drop the reply so that resend happens on an unlinked file.
#define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
set_nodes_failloc $mdts 0x80000157
}
test_130a() {
remote_mds_nodsh && skip "remote MDS with nodsh"
[[ "$MDS1_VERSION" -ge $(version_code 2.7.2) ]] ||
skip "Need server version newer than 2.7.1"
test_130_base
wait $T130_PID || [ $? -eq 0 ] && error "stat should fail"
return 0
}
run_test 130a "enqueue resend on not existing file"
test_130b() {
remote_mds_nodsh && skip "remote MDS with nodsh"
[[ "$MDS1_VERSION" -ge $(version_code 2.7.2) ]] ||
skip "Need server version newer than 2.7.1"
test_130_base
# let the reply to be dropped
sleep 10
#define OBD_FAIL_SRV_ENOENT 0x217
set_nodes_failloc "$(mdts_nodes)" 0x80000217
wait $T130_PID || [ $? -eq 0 ] && error "stat should fail"
return 0
}
run_test 130b "enqueue resend on a stale inode"
test_130c() {
remote_mds_nodsh && skip "remote MDS with nodsh" && return
local mdts=$(mdts_nodes)
do_nodes ${CLIENTS:-$HOSTNAME} sync
echo XXX > $DIR/$tfile
cancel_lru_locks mdc
# Trigger writeback on $tfile.
#
# we need to race with unlink, unlink must complete before we will
# take a DLM lock, otherwise unlink will wait until intent will
# complete; but later than intent starts so that intent found
# the object
#define OBD_FAIL_MDS_INTENT_DELAY 0x160
set_nodes_failloc $mdts 0x80000160
sync &
T130_PID=$!
sleep 2
rm $DIR/$tfile
# drop the reply so that resend happens on an unlinked file.
#define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
set_nodes_failloc $mdts 0x80000157
# let the reply to be dropped
sleep 10
#define OBD_FAIL_SRV_ENOENT 0x217
set_nodes_failloc $mdts 0x80000217
wait $T130_PID
return 0
}
run_test 130c "layout intent resend on a stale inode"
test_132() {
local before=$(date +%s)
local evict
mount_client $MOUNT2 || error "mount filed"
rm -f $DIR/$tfile
# get a lock on client so that export would reach the stale list
$LFS setstripe -i 0 $DIR/$tfile || error "setstripe failed"
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=fsync ||
error "dd failed"
#define OBD_FAIL_OST_PAUSE_PUNCH 0x236
do_facet ost1 $LCTL set_param fail_val=120 fail_loc=0x80000236
$TRUNCATE $DIR/$tfile 100 &
sleep 1
dd if=/dev/zero of=$DIR2/$tfile bs=4096 count=1 conv=notrunc ||
error "dd failed"
wait
umount_client $MOUNT2
evict=$(do_facet client $LCTL get_param \
osc.$FSNAME-OST0000-osc-*/state |
awk -F"[ [,]" '/EVICTED ]$/ { if (t<$5) {t=$5;} } END { print t }')
[ -z "$evict" ] || [[ $evict -le $before ]] ||
(do_facet client $LCTL get_param \
osc.$FSNAME-OST0000-osc-*/state;
error "eviction happened: $evict before:$before")
}
run_test 132 "long punch"
test_131() {
remote_ost_nodsh && skip "remote OST with nodsh" && return 0
rm -f $DIR/$tfile
# get a lock on client so that export would reach the stale list
$LFS setstripe -i 0 $DIR/$tfile || error "setstripe failed"
dd if=/dev/zero of=$DIR/$tfile count=1 || error "dd failed"
# another IO under the same lock
#define OBD_FAIL_OSC_DELAY_IO 0x414
$LCTL set_param fail_loc=0x80000414 fail_val=10
dd if=/dev/zero of=$DIR/$tfile count=1 conv=notrunc oflag=dsync &
local pid=$!
sleep 0.2
#define OBD_FAIL_LDLM_BL_EVICT 0x31e
set_nodes_failloc "$(osts_nodes)" 0x8000031e
ost_evict_client
client_reconnect
$LCTL set_param fail_loc=0
wait $pid && error "dd succeeded"
return 0
}
run_test 131 "IO vs evict results to IO under staled lock"
test_133() {
local t=$((TIMEOUT * 2))
touch $DIR/$tfile
flock $DIR/$tfile -c "echo bl lock;sleep $t;echo bl flock unlocked" &
sleep 1
multiop_bg_pause $DIR/$tfile O_jc || return 1
PID=$!
#define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
do_nodes $(mdts_nodes) $LCTL set_param fail_loc=0x80000157
kill -USR1 $PID
echo "waiting for multiop $PID"
wait $PID || return 2
rm -f $DIR/$tfile
return 0
}
run_test 133 "don't fail on flock resend"
test_134() {
[ $CLIENTCOUNT -lt 2 ] &&
{ skip "Need 2+ clients, have $CLIENTCOUNT" && return; }
mkdir -p $MOUNT/$tdir/1 $MOUNT/$tdir/2 || error "mkdir failed"
touch $MOUNT/$tdir/1/$tfile $MOUNT/$tdir/2/$tfile ||
error "touch failed"
zconf_umount_clients $CLIENTS $MOUNT
zconf_mount_clients $CLIENTS $MOUNT
#define OBD_FAIL_TGT_REPLY_DATA_RACE 0x722
# assume commit interval is 5
do_facet mds1 "$LCTL set_param fail_loc=0x722 fail_val=5"
local -a clients=(${CLIENTS//,/ })
local client1=${clients[0]}
local client2=${clients[1]}
do_node $client1 rm $MOUNT/$tdir/1/$tfile &
rmpid=$!
do_node $client2 mv $MOUNT/$tdir/2/$tfile $MOUNT/$tdir/2/${tfile}_2 &
mvpid=$!
fail mds1
wait $rmpid || error "rm failed"
wait $mvpid || error "mv failed"
return 0
}
run_test 134 "race between failover and search for reply data free slot"
test_135() {
[ "$MDS1_VERSION" -lt $(version_code 2.12.51) ] &&
skip "Need MDS version at least 2.12.51"
mkdir -p $DIR/$tdir
$LFS setstripe -E 1M -L mdt $DIR/$tdir
# to have parent dir write lock before open/resend
touch $DIR/$tdir/$tfile
#define OBD_FAIL_MDS_LDLM_REPLY_NET 0x157
do_nodes $(mdts_nodes) "$LCTL set_param fail_loc=0x80000157"
openfile -f O_RDWR:O_CREAT -m 0755 $DIR/$tdir/$tfile ||
error "Failed to open DOM file"
}
run_test 135 "DOM: open/create resend to return size"
test_136() {
remote_mds_nodsh && skip "remote MDS with nodsh"
[[ "$MDS1_VERSION" -ge $(version_code 2.12.52) ]] ||
skip "Need MDS version at least 2.12.52"
local mdts=$(mdts_nodes)
local MDT0=$(facet_svc $SINGLEMDS)
local clog=$(do_facet mds1 $LCTL --device $MDT0 changelog_register -n)
[ -n "$clog" ] || error "changelog_register failed"
cl_mask=$(do_facet mds1 $LCTL get_param \
mdd.$MDT0.changelog_mask -n)
changelog_chmask "ALL"
# generate some changelog records to accumulate
test_mkdir -i 0 -c 0 $DIR/$tdir || error "mkdir $tdir failed"
createmany -m $DIR/$tdir/$tfile 10000 ||
error "create $DIR/$tdir/$tfile failed"
local size1=$(do_facet $SINGLEMDS \
$LCTL get_param -n mdd.$MDT0.changelog_size)
echo "Changelog size $size1"
#define OBD_FAIL_LLOG_PURGE_DELAY 0x1318
do_nodes $mdts $LCTL set_param fail_loc=0x1318 fail_val=30
# launch changelog_deregister in background on MDS
do_facet mds1 "nohup $LCTL --device $MDT0 changelog_deregister $clog \
> foo.out 2> foo.err < /dev/null &"
# give time to reach fail_loc
sleep 15
# fail_loc will make MDS sleep in the middle of changelog_deregister
# take this opportunity to abruptly kill MDS
FAILURE_MODE_save=$FAILURE_MODE
FAILURE_MODE=HARD
fail mds1
FAILURE_MODE=$FAILURE_MODE_save
do_nodes $mdts $LCTL set_param fail_loc=0x0 fail_val=0
local size2=$(do_facet $SINGLEMDS \
$LCTL get_param -n mdd.$MDT0.changelog_size)
echo "Changelog size $size2"
local clog2=$(do_facet $SINGLEMDS "$LCTL get_param -n \
mdd.$MDT0.changelog_users | grep $clog")
echo "After crash, changelog user $clog2"
[ -n "$clog2" -o $size2 -lt $size1 ] ||
error "changelog record count unchanged"
do_facet mds1 $LCTL set_param mdd.$MDT0.changelog_mask=\'$cl_mask\' -n
}
run_test 136 "changelog_deregister leaving pending records"
test_137() {
df $DIR
mkdir_on_mdt0 $DIR/$tdir
mkdir $DIR/$tdir/d1
mkdir $DIR/$tdir/d2
dd if=/dev/zero of=$DIR/$tdir/d1/$tfile bs=4096 count=1
dd if=/dev/zero of=$DIR/$tdir/d2/$tfile bs=4096 count=1
cancel_lru_locks osc
#define OBD_FAIL_PTLRPC_RESEND_RACE 0x525
do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000525"
# RPC1: any reply is to be delayed to disable last_xid logic
ln $DIR/$tdir/d1/$tfile $DIR/$tdir/d1/f2 &
sleep 1
# RPC2: setattr1 reply is delayed & resent
# original reply comes to client; the resend get asleep
chmod 666 $DIR/$tdir/d2/$tfile
# RPC3: setattr2 on the same file; run ahead of RPC2 resend
chmod 777 $DIR/$tdir/d2/$tfile
# RPC2 resend wakes up
sleep 5
[ $(stat -c "%a" $DIR/$tdir/d2/$tfile) == 777 ] ||
error "resend got applied"
}
run_test 137 "late resend must be skipped if already applied"
test_138() {
remote_mds_nodsh && skip "remote MDS with nodsh"
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
[[ "$MDS1_VERSION" -ge $(version_code 2.12.59) ]] ||
skip "Need server version newer than 2.12.59"
zconf_umount_clients $CLIENTS $MOUNT
#define OBD_FAIL_TGT_RECOVERY_CONNECT 0x724
#delay a first step of recovey when MDS waiting clients
#and failing to get osp logs
do_facet $SINGLEMDS $LCTL set_param fail_loc=0x724 fail_val=5
facet_failover $SINGLEMDS
#waiting failover and recovery timer
#the valuse is based on target_recovery_overseer() wait_event timeout
sleep 55
stop $SINGLEMDS || error "stop MDS failed"
do_facet $SINGLEMDS $LCTL set_param fail_loc=0
start $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) $MDS_MOUNT_OPTS ||
error "start MDS failed"
zconf_mount_clients $CLIENTS $MOUNT
}
run_test 138 "Umount MDT during recovery"
test_139() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return 0
[ $MDS1_VERSION -lt $(version_code 2.13.50) ] &&
skip "Need MDS version at least 2.13.50"
stop $SINGLEMDS || error "stop $SINGLEMDS failed"
#define OBD_FAIL_OSP_INVALID_LOGID 0x2106
do_facet $SINGLEMDS $LCTL set_param fail_val=0x68 fail_loc=0x80002106
start $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) $MDS_MOUNT_OPTS ||
error "Fail to start $SINGLEMDS"
}
run_test 139 "corrupted catid won't cause crash"
test_140a() {
[ $MDS1_VERSION -lt $(version_code 2.12.58) ] &&
skip "Need MDS version at least 2.13.50"
slr=$(do_facet mds1 \
$LCTL get_param -n mdt.$FSNAME-MDT0000.local_recovery)
stack_trap "do_facet mds1 $LCTL set_param \
mdt.*.local_recovery=$slr" EXIT
# disable recovery for local clients
# so local clients should be marked with no_recovery flag
do_facet mds1 $LCTL set_param mdt.*.local_recovery=0
mount_mds_client
local cnt
cnt=$(do_facet mds1 $LCTL get_param "mdt.*MDT0000.exports.*.export" |
grep export_flags.*no_recovery | wc -l)
echo "$cnt clients with recovery disabled"
umount_mds_client
[ $cnt -eq 0 ] && error "no clients with recovery disabled"
# enable recovery for local clients
# so no local clients should be marked with no_recovery flag
do_facet mds1 $LCTL set_param mdt.*.local_recovery=1
mount_mds_client
cnt=$(do_facet mds1 $LCTL get_param "mdt.*MDT0000.exports.*.export" |
grep export_flags.*no_recovery | wc -l)
echo "$cnt clients with recovery disabled"
umount_mds_client
[ $cnt -eq 0 ] || error "$cnt clients with recovery disabled"
}
run_test 140a "local mount is flagged properly"
test_140b() {
[ $MDS1_VERSION -lt $(version_code 2.12.58) ] &&
skip "Need MDS version at least 2.13.50"
slr=$(do_facet mds1 \
$LCTL get_param -n mdt.$FSNAME-MDT0000.local_recovery)
stack_trap "do_facet mds1 $LCTL set_param \
mdt.*.local_recovery=$slr" EXIT
# disable recovery for local clients
do_facet mds1 $LCTL set_param mdt.*.local_recovery=0
mount_mds_client
replay_barrier mds1
umount_mds_client
fail mds1
# Lustre: tfs-MDT0000: Recovery over after 0:03, of 2 clients 2 rec...
local recovery=$(do_facet mds1 dmesg |
awk '/Recovery over after/ { print $6 }' | tail -1 |
awk -F: '{ print $1 * 60 + $2 }')
(( recovery < TIMEOUT * 2 + 5 )) ||
error "recovery took too long $recovery > $((TIMEOUT * 2 + 5))"
}
run_test 140b "local mount is excluded from recovery"
test_141() {
local oldc=0
local newc
local oldgen
[ "$PARALLEL" == "yes" ] && skip "skip parallel run"
combined_mgs_mds || skip "needs combined MGS/MDT"
( local_mode || from_build_tree ) &&
skip "cannot run in local mode or from build tree"
# some get_param have a bug to handle dot in param name
oldgen=$(do_facet ost1 $LCTL get_param -n mgc.*.import |
awk '/generation:/{print $NF}')
do_rpc_nodes $(facet_active_host ost1) cancel_lru_locks MGC
local end=$((SECONDS + 30))
local tmpc=1
while (( oldc == 0 || tmpc != oldc )) && (( SECONDS < end )); do
tmpc=$oldc
sleep 1
oldc=$(do_facet ost1 \
$LCTL "get_param -n 'ldlm.namespaces.MGC*.lock_count'")
done
fail $SINGLEMDS
wait_mgc_import_state ost1 FULL
wait_update_facet_cond ost1 "$LCTL get_param -n mgc.*.import |
awk '/generation:/{print}' | cut -d':' -f2" "!=" " $oldgen"
do_rpc_nodes $(facet_active_host ost1) cancel_lru_locks MGC
wait_update_facet ost1 \
"$LCTL get_param -n 'ldlm.namespaces.MGC*.lock_count'" $oldc ||
{
newc=$(do_facet ost1 \
$LCTL get_param -n 'ldlm.namespaces.MGC*.lock_count')
error "mgc lost locks ($oldc != $newc)"
}
}
run_test 141 "do not lose locks on MGS restart"
test_142() {
[ $MDS1_VERSION -lt $(version_code 2.11.56) ] &&
skip "Need MDS version at least 2.11.56"
#define OBD_FAIL_MDS_ORPHAN_DELETE 0x165
do_facet mds1 $LCTL set_param fail_loc=0x165
$MULTIOP $DIR/$tfile Ouc || error "multiop failed"
stop mds1
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
wait_update_facet mds1 "pgrep orph_.*-MDD | wc -l" "0" ||
error "MDD orphan cleanup thread not quit"
}
run_test 142 "orphan name stub can be cleaned up in startup"
test_143() {
(( $MDS1_VERSION >= $(version_code 2.13.0) )) ||
skip "Need MDS version at least 2.13.0"
[ "$PARALLEL" == "yes" ] && skip "skip parallel run"
local mntpt=$(facet_mntpt $SINGLEMDS)
stop mds1
mount_fstype $SINGLEMDS || error "mount as fstype $SINGLEMDS failed"
do_facet $SINGLEMDS touch $mntpt/PENDING/$tfile
unmount_fstype $SINGLEMDS
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "mds1 start fail"
wait_recovery_complete $SINGLEMDS || error "MDS recovery not done"
wait_update_facet mds1 "pgrep orph_.*-MDD | wc -l" "0" ||
error "MDD orphan cleanup thread not quit"
}
run_test 143 "orphan cleanup thread shouldn't be blocked even delete failed"
test_144a() {
[[ $($LCTL get_param mdc.*.import) =~ connect_flags.*overstriping ]] ||
skip "server does not support overstriping"
(( MDS1_VERSION >= $(version_code 2.15.50.49) )) ||
skip "Need MDS version at least 2.15.50.49"
local pids=""
local setcount=1000
local mds_timeout
local before
local after
local diff
local mdts=$(mdts_nodes)
large_xattr_enabled || skip_env "ea_inode feature disabled"
test_mkdir -i 0 -c 1 -p $DIR/$tdir
stack_trap "rm -rf $DIR/$tdir" EXIT
mds_timeout=$(do_facet mds1 $LCTL get_param -n timeout)
do_nodes $mdts "$LCTL set_param timeout=300"
stack_trap "do_nodes $mdts $LCTL set_param timeout=$mds_timeout"
$LFS setstripe -i 0 -C $setcount $DIR/$tdir || error "setstripe failed"
for (( i = 0; i < 50; i++)); do
touch $DIR/$tdir/$tfile_$i &
pids="$pids $!"
done
fail ost1
sleep 60
for pid in $pids; do
kill -9 $pid >/dev/null 2>&1
done
before=$SECONDS
fail mds1
after=$SECONDS
# here we measure MDT stop + MDT start time. For error case MDT stop takes
# about obd_timeout-60 (240) seconds. Without error - less than 30s.
# MDT start takes different time depends on a configuration, let's check
# the worst.
diff=$((after - before))
(( $diff < 240 )) || error "MDT failover took $diff seconds"
# failover mds1 back to the primary server
fail mds1
}
run_test 144a "MDT failover should stop precreation threads"
test_144b() {
[[ $($LCTL get_param mdc.*.import) =~ connect_flags.*overstriping ]] ||
skip "server does not support overstriping"
(( MDS1_VERSION >= $(version_code 2.15.51.50) )) ||
skip "Need MDS version at least 2.15.51.50"
local pids=""
local rc=0
local setcount=1000
local mds_timeout
local mdts=$(mdts_nodes)
large_xattr_enabled || skip_env "ea_inode feature disabled"
test_mkdir -i 0 -c 1 -p $DIR/$tdir
stack_trap "rm -rf $DIR/$tdir" EXIT
mds_timeout=$(do_facet mds1 $LCTL get_param -n timeout)
do_nodes $mdts "$LCTL set_param timeout=300"
stack_trap "do_nodes $mdts $LCTL set_param timeout=$mds_timeout"
$LFS setstripe -i 0 -C $setcount $DIR/$tdir || error "setstripe failed"
for (( i = 0; i < 50; i++)); do
touch $DIR/$tdir/$tfile_$i &
pids="$pids $!"
done
fail ost1
# 60s is not enought with ZFS which is still significatnly
# slower on some operations like record writing
local stime=60
[[ "$mds1_FSTYPE" != "zfs" ]] || stime=120
sleep $stime
for pid in $pids; do
ps -p $pid > /dev/null
(( $? == 0 )) && rc=1
kill -9 $pid >/dev/null 2>&1
done
echo "rc $rc"
(( $rc == 0 )) || { fail mds1; error "Create thread still running"; }
}
run_test 144b "orphan cleanup shouldn't be blocked for no objects+failover situation"
test_144c() {
[ "$PARALLEL" == "yes" ] && skip "skip parallel run"
remote_mds_nodsh && skip "remote MDS with nodsh"
remote_ost_nodsh && skip "remote OST with nodsh"
(( OST1_VERSION >= $(version_code 2.15.59.53) )) ||
skip "need OSS >= v2_15_59.53 for reconnect fix"
local rc
#increase a precreation window
mkdir_on_mdt0 $DIR/$tdir
$LFS setstripe -c 1 -i 0 $DIR/$tdir
createmany -o $DIR/$tdir/$tfile 9000
stop mds1
#define OBD_FAIL_OST_DELORPHAN_DELAY 0x254
#delay delorphan request to reconnection 5seconds
do_facet ost1 $LCTL set_param fail_loc=0x0000254 fail_val=5
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "mds1 start fail"
wait_recovery_complete mds1 || error "MDS recovery not done"
sleep 1
#reconnect
do_facet mds1 $LCTL --device $FSNAME-OST0000-osc-MDT0000 recover
do_facet ost1 $LCTL set_param fail_loc=0 fail_val=0
#first and second orphan request delayed for 5seconds
sleep 12
local testid=${TESTNAME//_/ }
do_facet ost1 "dmesg | tac | sed '/$testid/,$ d'" |
grep "trust the OST"
rc=$?
if (( rc == 0 )); then
remount_facet mds1
error "LAST_ID synchronization failed"
else
return 0
fi
}
run_test 144c "reconnection during orphan cleanup shouldn't lose LAST_ID synchronization"
test_145() {
[ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs"
[ $(facet_active_host mds2) = $(facet_active_host mds3) ] &&
skip "needs mds2 and mds3 on separate nodes"
replay_barrier mds1
touch $DIR/$tfile
#define OBD_FAIL_PTLRPC_DELAY_RECOV 0x507
echo block mds_connect from mds2
do_facet mds2 "$LCTL set_param fail_loc=0x507"
#define OBD_FAIL_OUT_UPDATE_DROP 0x1707
echo block recovery updates from mds3
do_facet mds3 "$LCTL set_param fail_loc=0x1707"
local hard_timeout=\
$(do_facet mds1 $LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_time_hard)
fail mds1 &
local get_soft_timeout_cmd=\
"$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_time_soft 2>/dev/null"
echo wait until mds1 recovery_time_soft is $hard_timeout
wait_update $(facet_host mds1) "$get_soft_timeout_cmd" \
"$hard_timeout" $hard_timeout
echo unblock mds_connect from mds2
do_facet mds2 "$LCTL set_param fail_loc=0"
echo upblock recovery updates from mds3
do_facet mds3 "$LCTL set_param fail_loc=0"
wait
[ -f $DIR/$tfile ] || error "$DIR/$tfile does not exist"
}
run_test 145 "connect mdtlovs and process update logs after recovery expire"
test_146() {
(( $MDS1_VERSION >= $(version_code 2.15.54.6) )) ||
skip "Need MDS >= v2_15_54-6-g3c69d46e17 for eviction_count"
local prev_count=$(do_facet $SINGLEMDS \
$LCTL get_param -n "mdt.${mds1_svc}.eviction_count")
mds_evict_client
client_reconnect
local next_count=$(do_facet $SINGLEMDS \
$LCTL get_param -n "mdt.${mds1_svc}.eviction_count")
[ "$prev_count" -lt "$next_count" ] ||
error "wrong eviction count ($prev_count >= $next_count)"
}
run_test 146 "test eviction is counted properly"
test_147() {
local obd_timeout=200
local old=$($LCTL get_param -n timeout)
local f=$DIR/$tfile
local connection_count
$LFS setstripe -i 0 -c 1 $f
stripe_index=$($LFS getstripe -i $f)
if [ $stripe_index -ne 0 ]; then
$LFS getstripe $f
error "$f: stripe_index $stripe_index != 0" && return
fi
$LCTL set_param timeout=$obd_timeout
stack_trap "$LCTL set_param timeout=$old && client_reconnect" EXIT
# OBD_FAIL_OST_CONNECT_NET2
# lost reply to connect request
do_facet ost1 lctl set_param fail_loc=0x00000225 timeout=$obd_timeout
stack_trap "do_facet ost1 $LCTL set_param fail_loc=0 timeout=$old" EXIT
ost_evict_client
# force reconnect
$LFS df $MOUNT > /dev/null 2>&1 &
sleep $((obd_timeout * 3 / 4))
$LCTL get_param osc.$FSNAME-OST0000-osc-*.state
connection_count=$($LCTL get_param osc.$FSNAME-OST0000-osc-*.state |
tac | sed "/FULL/,$ d" | grep CONNECTING | wc -l)
echo $connection_count
(($connection_count >= 6)) || error "Client reconnected too slow"
}
run_test 147 "Check client reconnect"
test_148() {
local wce_param="obdfilter.$FSNAME-OST0000.writethrough_cache_enable"
local p="$TMP/$TESTSUITE-$TESTNAME.parameters"
local amc=$(at_max_get client)
local amo=$(at_max_get ost1)
local timeout
at_max_set 0 client
at_max_set 0 ost1
timeout=$(request_timeout client)
[ "$(facet_fstype ost1)" = "ldiskfs" ] && {
# save old r/o cache settings
save_lustre_params ost1 $wce_param > $p
# disable r/o cache
do_facet ost1 "$LCTL set_param -n $wce_param=0"
}
$LFS setstripe -i 0 -c 1 $DIR/$tfile
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 oflag=direct
cp $DIR/$tfile $TMP/$tfile
#define OBD_FAIL_OST_BRW_PAUSE_BULK2 0x227
do_facet ost1 $LCTL set_param fail_loc=0x80000227
do_facet ost1 $LCTL set_param fail_val=$((timeout+2))
dd if=/dev/urandom of=$DIR/$tfile bs=4096 count=1 conv=notrunc,fdatasync
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 conv=notrunc,fdatasync
sleep 2
cancel_lru_locks osc
cmp -b $DIR/$tfile $TMP/$tfile || error "wrong data"
rm -f $DIR/$tfile $TMP/$tfile
at_max_set $amc client
at_max_set $amo ost1
[ "$(facet_fstype ost1)" = "ldiskfs" ] && {
# restore initial r/o cache settings
restore_lustre_params < $p
}
return 0
}
run_test 148 "data corruption through resend"
test_149() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
test_mkdir -i 0 -c $MDSCOUNT $DIR/$tdir || error "mkdir $tdir failed"
# make an orphan striped dir
$MULTIOP $DIR/$tdir D_c &
local PID=$!
sleep 0.3
rmdir $DIR/$tdir || error "can't rmdir"
# stop a slave MDT where one ons stripe is located
stop mds2 -f
# stopping should not cause orphan as another MDT can
# be stopped yet
stop mds1 -f
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "mds1 start fail"
start mds2 $(mdsdevname 2) $MDS_MOUNT_OPTS || error "mds1 start fail"
kill -USR1 $PID
wait $PID
clients_up
return 0
}
run_test 149 "skip orphan removal at umount"
test_150() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local lazystatfs
local max
lazystatfs=$($LCTL get_param -n llite.$FSNAME-*.lazystatfs | head -1)
max=$($LCTL get_param -n llite.$FSNAME-*.statahead_max | head -1)
$LCTL set_param llite.$FSNAME-*.lazystatfs=1
$LCTL set_param llite.$FSNAME-*.statahead_max=0
stack_trap "$LCTL set_param llite.$FSNAME-*.lazystatfs=$lazystatfs" EXIT
stack_trap "$LCTL set_param llite.$FSNAME-*.statahead_max=$max" EXIT
# stop a slave MDT where one ons stripe is located
stop mds1
stack_trap "start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS && \
wait_recovery_complete mds1 && clients_up && true" EXIT
df $MOUNT || error "statfs failed"
return 0
}
run_test 150 "statfs when MDT0 offline with lazystatfs option"
test_152() {
[[ $($LCTL get_param mdc.*.import) =~ connect_flags.*overstriping ]] ||
skip "server does not support overstriping"
local before
local after
local diff
local saved
local version
local pids_rr=""
local pids_qos=""
local setcount=500
large_xattr_enabled || skip_env "ea_inode feature disabled"
version=$(do_facet mds1 \
uname -r | sed -e "s/\([0-9]*\.[0-9]*\.[0-9]*\).*/\1/")
version=$(version_code ${version//\./ })
if (( $version < $(version_code 4.6.0) )); then
skip "MDS Linux kernel does not support killable semaphore"
fi
test_mkdir -i 0 -c 1 -p $DIR/$tdir
test_mkdir -i 0 -c 1 -p $DIR/$tdir/rr
test_mkdir -i 0 -c 1 -p $DIR/$tdir/qos
stack_trap "rm -rf $DIR/$tdir" EXIT
$LFS setstripe -C $setcount $DIR/$tdir/rr/ || error "setstripe failed"
#define OBD_FAIL_MDS_LOD_CREATE_PAUSE 0x173
#Simulate OST failover and sleep RR allocation under lq_rw_sem
do_facet mds1 $LCTL set_param fail_loc=0x80000173 fail_val=20
before=$(date +%s)
for (( i = 0; i < 2; i++)); do
touch $DIR/$tdir/rr/$tfile_$i &
pids_rr="$pids_rr $!"
done
sleep 3
saved=$(do_facet mds1 $LCTL get_param -n lov.*0000*.qos_threshold_rr)
do_facet mds1 $LCTL set_param lov.*.qos_threshold_rr=0
stack_trap "do_facet mds1 $LCTL set_param lov.*.qos_threshold_rr=$saved" EXIT
#create files with QoS algo, killable semaphore sleeps for 2seconds
for (( i = 0; i < 3; i++)); do
touch $DIR/$tdir/qos/$tfile_$i &
pids_qos="$pids_qos $!"
done
for pid in $pids_qos; do
wait $pid
done
after=$(date +%s)
diff=$((after - before))
echo "QoS allocation took $diff seconds"
for pid in $pids_rr; do
wait $pid
done
(( $diff < 20 )) ||
error "QoS allocation slower than RR, killable semaphore doesn't work"
}
run_test 152 "QoS object allocation could be awakened in case of OST failover"
test_153() {
(( MDS1_VERSION >= $(version_code 2.15.54.113) )) ||
skip "need MDS >= v2_15_54-113-g654d5f3fa4df for reconnect fix"
#define OBD_FAIL_MDS_CONNECT_VS_EVICT 0x174
do_facet mds1 "$LCTL set_param fail_loc=0x174"
# first drop ping reply from MDS and then
# evict on the subsequent reconnect
# (see target_handle_connect)
sleep $((TIMEOUT + 3))
stop mds1
do_facet mds1 "$LCTL set_param fail_loc=0"
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS ||
error "Fail to start $SINGLEMDS"
wait_recovery_complete mds1 || error "MDS recovery not done"
}
run_test 153 "evict vs reconnect race"
test_154a() {
(( MDS1_VERSION >= $(version_code 2.15.60.2) )) ||
skip "need MDS >= v2_15_60-2-ge81805244476 for llog fix"
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
stop mds2
local mnt=$(facet_mntpt mds2)
mount_fstype mds2
local ula=($(do_facet mds2 od -t u8 $mnt/update_log | \
awk '{ if($2 > 0) printf "0x%x:0x%x:0x0 ", $3, $2 }'))
[ ${#ula[@]} -lt 2 ] && error "update_log file corruption"
local catfile=$mnt/update_log_dir/\[${ula[0]}\]
echo replace file $catfile
do_facet mds2 dd if=/dev/urandom of=$catfile count=100 ||
error "Write file $catfile error"
unmount_fstype mds2
start mds2 $(mdsdevname 2) $MDS_MOUNT_OPTS || error "mds2 start fail"
stop mds1
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "mds1 start fail"
echo waiting mds1 recovery....
wait_recovery_complete mds1 20
do_facet mds1 $LCTL get_param mdt.$FSNAME-MDT0000.recovery_status | \
grep -w COMPLETE || error "Recovery was blocked"
}
run_test 154a "corruption update llog can be skipped"
test_154b() {
(( MDS1_VERSION >= $(version_code 2.15.60.2) )) ||
skip "need MDS >= v2_15_60-2-ge81805244476 for llog fix"
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
stop mds1
stack_trap "do_facet mds1 $LCTL set_param fail_loc=0"
#define OBD_FAIL_TGT_RECOVERY_CONNECT 0x724
do_facet mds1 $LCTL set_param fail_loc=0x0724 fail_val=5
local OPTS="$MDS_MOUNT_OPTS -o abort_recov"
start mds1 $(mdsdevname 1) $OPTS ||
error "start MDS with abort_recovery failed"
echo waiting mds1 recovery....
wait_recovery_complete mds1 30
do_facet mds1 $LCTL get_param mdt.$FSNAME-MDT0000.recovery_status | \
grep -w COMPLETE || error "Recovery was blocked"
mount_client $MOUNT2
umount_client $MOUNT2
remount_client $MOUNT
}
run_test 154b "restore update llog after failed recovery"
test_155() {
(( MDS1_VERSION >= $(version_code v2_15_58-110-g71f8e5d6506f) )) ||
skip "need MDS >= 2.15.58.110 for ptlrpc fix"
sync; cancel_lru_locks
local lsoutput1=$(mktemp -p ${TMP:-/tmp} $TESTNAME.1.XXXXXX})
local lsoutput2=$(mktemp -p ${TMP:-/tmp} $TESTNAME.2.XXXXXX})
local lsoutput2
touch $DIR/$tfile || error "creating $tfile"
ls -l $DIR > $lsoutput1 || error "ls1 failed"
stack_trap "rm -f $lsoutput1 $lsoutput2"
zconf_umount $HOSTNAME $MOUNT || error "umount failed"
# make sure that last_rcvd update is committed
do_facet mds1 sync
zconf_mount $HOSTNAME $MOUNT || error "mount failed"
replay_barrier_nosync mds1
fail_nodf mds1
ls -l $DIR > $lsoutput2 || error "ls2 failed"
diff -wu0 $lsoutput1 $lsoutput2 || error "ls1 != ls2"
}
run_test 155 "failover after client remount"
test_156()
{
(( OST1_VERSION >= $(version_code v2_15_60-90-g9df01eee75) )) ||
skip "Need OST >= 2.15.60.90 for tot_granted miscount fix"
# on failover recovery time hard will be 9 * 5
local saved_timeout=$(do_facet ost1 $LCTL get_param -n timeout)
do_facet mgs $LCTL set_param -P timeout=5 ||
error "failed to set obd_timeout"
stack_trap "do_facet mgs $LCTL set_param -P timeout=$saved_timeout" \
EXIT
$LFS setstripe -c 1 -i 0 $DIR/$tfile || error "setstripe failed"
# this is to sync last_rcvd, so that the client will have to
# send replay on recovery
$LFS df $MOUNT
do_facet ost1 sync
replay_barrier ost1
$MULTIOP $DIR/$tfile oO_RDWR:O_SYNC:w1048576c || error "multiop failed"
# delay write replay for 45 sec (OBD_RECOVERY_TIME_HARD) to
# get the client evicted as not sending replays
#define OBD_FAIL_PTLRPC_REPLAY_PAUSE 0x536
$LCTL set_param fail_loc=0x80000536 fail_val=45
fail ost1
# check that ost1 evicted the client in recovery
local clients
clients=($(do_facet ost1 \
$LCTL get_param -n obdfilter.$FSNAME-OST0000.recovery_status |
awk '/completed_clients/ { print $2 }' | tr '/' '\n'))
[[ $((${clients[0]} + 1)) == ${clients[1]} ]] ||
error "client not evicted by ost1"
local testid=$(echo $TESTNAME | tr '_' ' ')
do_facet ost1 dmesg | tac | sed "/$testid/,$ d" |
grep "ofd_obd_disconnect: tot_granted" &&
error "grant miscount" || true
}
run_test 156 "tot_granted miscount after client eviction"
test_157()
{
(( MDS1_VERSION >= $(version_code 2.15.58.110) )) ||
skip "need MDS >= v2_15_58-110-g71f8e5d6506f to avoid eviction"
$LFS setstripe -i 0 -c 1 $DIR/$tfile || error "setstripe failed"
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
cancel_lru_locks osc
#define OBD_FAIL_LLITE_FAULT_PAUSE 0x1432
$LCTL set_param fail_loc=0x80001432 fail_val=3
$MULTIOP $DIR/$tfile soO_RDWR:MRUc &
MULTIPID=$!
sleep 1
ost_evict_client
wait $MULTIPID
local rc=$?
(( rc == 0 || rc == 135 )) ||
error "multiop failed with $rc, not SIGBUS (135)"
}
run_test 157 "eviction during mmaped i/o"
cleanup_158() {
do_facet mds2 $LCTL set_param fail_loc=0
zconf_umount_clients $CLIENTS $MOUNT
mountcli
}
test_158a() {
(( $MDS1_VERSION >= $(version_code 2.15.62) )) ||
skip "Need MDS version at least 2.15.62 for -EACCES fix"
(( MDSCOUNT > 1 )) || skip "needs >= 2 MDTS"
remount_client $MOUNT
# ensure there is no MOUNT2 on clients
zconf_umount_clients $CLIENTS $MOUNT2 -f
stack_trap cleanup_158 EXIT RETURN
# client import is evicted after failover followed by -EACCES
#define OBD_FAIL_MDS_CONNECT_ACCESS 0x2402
do_facet mds2 $LCTL set_param fail_loc=0x2402
fail_nodf mds2
sleep 5
$LFS df $MOUNT
do_facet mds2 $LCTL set_param fail_loc=0
wait_recovery_complete mds2 || error "MDS recovery not done"
sleep 5
local mdc2=$($LCTL dl | awk '/mdc.*MDT0001-mdc*/ { print $4}')
local active=$($LCTL get_param -n mdc.$mdc2.active)
(( active == 0 )) || error "import status is 'active'"
$LCTL --device $mdc2 activate
active=$($LCTL get_param -n mdc.$mdc2.active)
(( active == 1 )) || error "import status is not 'active'"
status=$($LFS check mdts | grep $mdc2 | grep -c active)
(( status == 1 )) || {
$LFS check mdts
error "import is not operational"
}
}
run_test 158a "connect without access right"
test_160() {
(( $MDS1_VERSION >= $(version_code 2.15.62) )) ||
skip "Need MDS version at least 2.15.62 for group lock destroy fix"
local threads=10
local size=$((1024*100))
local timeout=10
local pids
test_mkdir -i 0 -c 1 $DIR/$tdir
$LFS setstripe -c 1 -i 0 $DIR/$tdir
for ((i = 1; i <= threads; i++)); do
local file=$DIR/$tdir/file_$i
#open/group lock/write/unlink/pause/group unlock/close
$MULTIOP $file OG1234w10240u_g1234c &
pids[$i]=$!
done
sleep 2
#evict client from MDS, MDS starts to unlink files/destroy objects
mds_evict_client
client_reconnect
wait_update_facet_cond --verbose mds1 \
"$LCTL get_param -n osp.$FSNAME-OST0000-osc-MDT0000.destroys_in_flight" \
"-le" "2" $((timeout * 3))
local rc=$?
do_facet mds1 $LCTL get_param osp.$FSNAME-OST0000-osc-MDT0000.error_list
for ((i = 1; i <= threads; i++)); do
kill -USR1 ${pids[$i]} && wait ${pids[$i]}
done
(( rc == 0 )) || error "destroying OST objects are blocked"
#without group lock, wait and check if all objects are destroyed
sleep $((timeout * 3))
do_facet mds1 $LCTL get_param osp.$FSNAME-OST0000-osc-MDT0000.error_list
local errs=$(do_facet mds1 $LCTL get_param -n osp.$FSNAME-OST0000-osc-MDT0000.error_list | wc -l)
rc=$(do_facet mds1 $LCTL get_param -n osp.$FSNAME-OST0000-osc-MDT0000.destroys_in_flight)
(( $errs == 0 )) || error "error_list not empty"
(( $rc == 0 )) || error "$rc destroys in flight"
}
run_test 160 "MDT destroys are blocked by grouplocks"
test_161() {
[[ $MDSCOUNT -lt 2 ]] && skip_env "needs >= 2 MDTs"
local ping_interval=$($LCTL get_param -n ping_interval)
local evict_multiplier=$($LCTL get_param -n evict_multiplier)
local pause=$((ping_interval * (evict_multiplier + 2)))
#define OBD_FAIL_OBD_PAUSE_EVICTOR 0x60f
do_facet mds1 $LCTL set_param fail_loc=0x8000060f
$LFS mkdir -i 1 $DIR/$tdir || error "mkdir $tdir"
$LFS mkdir -i 0 $DIR/$tdir/remote || error "mkdir $tdir/remote"
echo sleep $pause seconds
sleep $pause
rmdir $DIR/$tdir/remote || error "rmdir $tdir/remote"
}
run_test 161 "evict osp by ping evictor"
test_162() {
(( $MDS1_VERSION >= $(version_code 2.16.55) )) ||
skip "Need MDS version at least 2.16.55 for file attribute fix"
local mntpt=$(facet_mntpt $SINGLEMDS)
test_mkdir -i 0 -c 1 $DIR/$tdir
$LFS setstripe -c 1 -i 0 $DIR/$tdir
local wfile=$DIR/$tdir/$tfile
local rstr="aAdDiPST"
stack_trap "chattr -$rstr $wfile; rm -rf $DIR/$tdir" EXIT
touch $wfile
for ((i = 0; i < ${#rstr[0]}; i++)); do
local c=${rstr:i:1}
chattr +$c $wfile || error "Flag [$c] should succeed"
done
local attr1=($(lsattr $wfile))
echo $attr1
[[ -n ${attr1//-/} ]] || error "lsattr failed: $(lsattr $wfile)"
stop mds1
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS || error "mds1 start fail"
wait_recovery_complete $SINGLEMDS || error "MDS recovery not done"
local attr2=($(lsattr $wfile))
echo $attr2
[[ "$attr1" == "$attr2" ]] ||
error "'$attr1' different with '$attr2'"
}
run_test 162 "File attributes should be persisted after MDS failover"
test_163() {
remote_mds_nodsh && skip "remote MDS with nodsh"
(( "$MDS1_VERSION" >= $(version_code 2.16.54) )) ||
skip "Need MDS version at least 2.16.54 to skip llog holes"
local mdtidx
local mdtsvc
changelog_register || error "changelog_register failed"
stack_trap changelog_deregister EXIT
test_mkdir -c 0 $DIR/$tdir || error "mkdir $tdir failed"
mdtidx=$(($($LFS getdirstripe -i $DIR/$tdir) + 1))
mdtsvc=$(facet_svc mds$mdtidx)
echo mds$mdtidx $mdtsvc
cl_mask=$(do_facet mds$mdtidx $LCTL get_param mdd.$mdtsvc.changelog_mask -n)
changelog_chmask "ALL"
stack_trap "do_facet mds$mdtidx \
$LCTL set_param mdd.$mdtsvc.changelog_mask=\'$cl_mask\' -n" EXIT
#define OBD_FAIL_MDS_CHANGELOG_FAIL_WRITE 0x18f
do_facet mds$mdtidx $LCTL set_param fail_loc=0x18f fail_val=30
# generate some changelog records to create a gap every 31 index
for (( i = 0; i < 10; i++)); do
createmany -m $DIR/$tdir/$tfile_$i 40 &
done
# Check changelog gap processing without a jump to a next chunk
changelog_dump | awk -F'[ .]' '{if(prev != "" && $2 - prev > 2) \
{print"Errot between "prev" and "$2; exit 1}prev=$2}' ||
error "Found a gap"
}
run_test 163 "changelog check for fail write and processing records"
test_170() {
remote_ost_nodsh && skip "remote OST with nodsh"
(( "$OST1_VERSION" >= $(version_code 2.17.53) )) ||
skip "Need OST version at least 2.17.53"
[[ $(facet_host client) != $(facet_host ost1) ]] ||
skip "need ost1 and client on different nodes"
local num_files=20
local i
mkdir $DIR/$tdir || error "mkdir $MOUNT/$tdir failed"
$LFS setstripe -i 0 $DIR/$tdir || error "setstripe $tdir failed"
echo "$tfile" > $DIR/$tdir/$tfile
sync
replay_barrier ost1
for ((i = 0; i < num_files; i++)); do
local file=$DIR/$tdir/$tfile-$i
dd if=/dev/urandom of=$file count=1 bs=4096 ||
error "write failed: $file"
done
#define OBD_FAIL_PTLRPC_FAIL_REPLAY 0x537
#delay REPLAY_LOCKS phase to accumulate reqs at client side
do_facet ost1 "$LCTL set_param fail_loc=0x0000537 fail_val=10"
#at client simulate error reply and reconnect
$LCTL set_param fail_loc=0x80000537
fail_nodf ost1
stack_trap "$LCTL get_param osc.*OST0000-osc-*.state" EXIT
#should be reconnection and new recovery, at client state
#REPLAY_LOCKS
#CONNECTING
#REPLAY..
wait_clients_import_state ${HOSTNAME} ost1 "\(FULL\|IDLE\)" 60
}
run_test 170 "Reconnect after REPLAY_LOCKS hangs (LU-18154)"
complete_test $SECONDS
check_and_cleanup_lustre
exit_status
