Viewing: auster
#!/usr/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# This file is part of Lustre, http://www.lustre.org/
#
# lustre/tests/auster
#
# Drive lustre tests
#
#
# TODO
# 1. --time-limt <seconds> add per test time limit, kill test if it runs to long
# 2. Read list of tests to run from a file. same syntax as cli, but one test per line
# 3. Run test on remote node
#
set -e
export TF_FAIL=/tmp/tf.fail
export TF_SKIP=/tmp/tf.skip
usage() {
less -F <<EOF
Usage ${0##*/} [options] suite [suite options] [suite [suite options]]
Run Lustre regression tests suites.
-c, --config CONFIG Test environment config file
-C, --client-only Run client-side sanity tests against an already setup
filesystem. Users must define FSNAME and mgs_HOST manually.
-d, --log-dir LOGDIR Top level directory for logs
-D, --full-log-dir FULLLOGDIR Full directory for logs
-f, --cfg-name STR Config name (cfg/<name>.sh)
-g, --group GROUP Test group file (Overrides tests listed on command line)
-S, --suite TESTSUITE First test suite to run allows for restarts
-H, --honor Honor the EXCEPT and ALWAYS_EXCEPT list when --only is used
-i, --repeat N Repeat tests N times (default 1). A new directory
will be created under LOGDIR for each iteration.
-k --no-stop Don't stop when subtests fail
-R, --remount Remount lustre between tests
-r, --reformat Reformat (during initial configuration if needed)
-s --slow SLOW=yes
-v, --verbose Verbose mode
-l, --send-logs Send logs to the Maloo database after run
(can be done later by running maloo_upload.sh)
-L, --lang Script language of test suite. Default: bash
-N, --no-setup No setup. Do not setup Lustre prior to executing test suite.
-h, --help This help.
Suite options
These are suite specific options that can be specified after each suite on
the command line.
suite-name [options]
--only LIST Run only specific list of subtests
--except LIST Skip list of subtests
--start-at SUBTEST Start testing from subtest
--stop-at SUBTEST Stop testing at subtest
--time-limit LIMIT Don't allow this suite to run longer
than LIMT seconds. [UNIMPLEMENTED]
Example usage:
Run all of sanity and all of replay-single except for 70b with SLOW=y using
the default "local" configuration.
auster -s sanity replay-single --except 70b
Run all tests in the regression group 5 times using large config.
auster -f large -g test-groups/regression -i 5
Run the client-only tests from sanity.
FSNAME=myfilesystem mgs_HOST=1.2.3.4 auster -C sanity
EOF
exit
}
dry_run=false
do_reset=false
verbose=false
repeat_count=1
upload_logs=false
reformat=false
script_lang=bash
test_logs_dir=/tmp/test_logs/$(date +%Y-%m-%d)/$(date +%H%M%S)
export HONOR_EXCEPT=
export do_setup=true
export client_tests_only=false
export "${SLOW:=no}"
export "${NAME:=local}"
# Replace long option with corresponding short option
for arg in "$@"; do
shift
case "$arg" in
--config) set -- "$@" '-c';;
--client-only) set -- "$@" '-C';;
--log-dir) set -- "$@" '-d';;
--full-log-dir) set -- "$@" '-D';;
--group) set -- "$@" '-g';;
--suite) set -- "$@" '-S';;
--no-stop) set -- "$@" '-k';;
--verbose) set -- "$@" '-v';;
--honor) set -- "$@" '-H';;
--repeat) set -- "$@" '-i';;
--cfg-name) set -- "$@" '-f';;
--remount) set -- "$@" '-R';;
--reformat) set -- "$@" '-r';;
--slow) set -- "$@" '-s';;
--send-logs) set -- "$@" '-l';;
--lang) set -- "$@" '-L';;
--no-setup) set -- "$@" '-N';;
--help) set -- "$@" '-h';;
*) set -- "$@" "$arg";;
esac
done
while getopts "c:Cd:D:nkf:S:g:Hi:rRslL:Nhv" opt
do
case "$opt" in
c) export CONFIG=$OPTARG;;
C) client_tests_only=true;;
d) test_logs_dir=$OPTARG/$(date +%Y-%m-%d)/$(date +%H%M%S);;
D) test_logs_dir=$OPTARG;;
g) test_group_file=$OPTARG;;
S) FIRST_SUITE=$OPTARG;;
k) export FAIL_ON_ERROR=false;;
n) dry_run=:;;
v) verbose=:;;
H) export HONOR_EXCEPT="y";;
i) repeat_count=$OPTARG;;
f) NAME=$OPTARG;;
R) do_reset=:;;
r) reformat=:;;
s) export SLOW=yes;;
l) upload_logs=true;;
L) script_lang=$OPTARG;;
N) do_setup=false;;
h|\?) usage;;
esac
done
# If a test_group_file is specified, then ignore rest of command line
if [[ $test_group_file ]]; then
export TEST_GROUP=$(basename $test_group_file)
set $(sed 's/#.*$//' $test_group_file)
else
shift $((OPTIND -1))
fi
STARTTIME=`date +%s`
: ${LUSTRE:=$(cd $(dirname $0)/..; echo $PWD)}
. $LUSTRE/tests/test-framework.sh
init_test_env
# Set CLIENTONLY, while trying to discover some common
# variables so the test runner doesn't need do this
# manually
if $client_tests_only; then
export CLIENTONLY=true;
export FSTYPE=${FSTYPE:-ldiskfs};
export MDSCOUNT="$(( $($LFS mdts | wc -l) - 1 ))"
export OSTCOUNT="$(( $($LFS osts | wc -l) - 1 ))"
fi
# special return code to stop testing without cleanup
# used with the --stop-on-error option
export STOP_NOW_RC=111
if [ $upload_logs = true ] ; then
upload_script=$(find_script_in_path maloo_upload.sh $PATH:$LUSTRE/tests)
if [[ -z $upload_script ]]; then
echo "Can't find maloo_upload.sh script"
exit 1
fi
if [ ! -r ~/.maloorc ] ; then
echo "A ~/.maloorc file is required in order to upload results."
echo "Visit your maloo web interface to download your .maloorc file"
exit 1
fi
fi
export NAME MOUNT START CLEAN
. ${CONFIG:-$LUSTRE/tests/cfg/$NAME.sh}
# Only need to know where (MOUNT) and how (mgs_HOST) to
# mount Lustre for client-side only tests
if $client_tests_only; then
assert_env mgs_HOST
else
assert_env mds_HOST
assert_env ost_HOST OSTCOUNT
assert_env MOUNT2
fi
assert_env FSNAME MOUNT
echo "Started at `date`"
setup_if_needed
run_suites "$@"
RC=$?
if [[ $RC -eq 0 ]]; then
cleanup_if_needed
fi
echo "Finished at `date` in $((`date +%s` - $STARTTIME))s"
echo "$0: completed with rc $RC" && exit $RC
